Command 5 lb Large Utility Hooks (Model 17003-MPES) Instruction Manual

giriiş

The Command 5 lb Large Utility Hooks provide a damage-free solution for organizing and decorating your home, office, or dorm room. These hooks utilize advanced adhesive technology to hold strongly on various smooth surfaces and remove cleanly without leaving holes, marks, or sticky residue. Each large utility hook is designed to hold up to 5 pounds, offering versatile hanging options for a range of items.

Güvenlik Bilgileri

• Yatakların üzerine asılmayın.
• Duvar kağıdı üzerinde kullanmayın.
• Değerli eşyaları asmak için kullanmayın.
• Ensure indoor temperature is between 50°F (10°C) and 105°F (40°C) for optimal adhesion.
• Wait seven days after painting before using Command Hooks to allow paint to cure.

Paket İçeriği

Each package of Command 5 lb Large Utility Hooks includes:

• 14 x Large Utility Hooks
• 16 x Large Adhesive Strips

Kurulum ve Yükleme

Follow these steps for proper installation to ensure maximum holding power and damage-free removal.

1. Yüzey Hazırlığı

Clean the desired surface with rubbing alcohol to remove any grime and dust. This allows the adhesive strips to bond effectively. Do not use household cleaners or water, as they can leave slippery residues that prevent proper adhesion.

2. Attaching Strips to Hooks

Separate the adhesive strips. Each strip has two sides. One side is marked for the wall, and the other for the hook.

Image: A hand demonstrates attaching the adhesive strip to the flat back of a Command Large Utility Hook. The strip is white with red 'Command' branding.

Press the adhesive strip firmly onto the back of the hook. Ensure the entire strip is pressed down for 30 seconds to create a strong bond.

3. Applying Hooks to the Wall

Remove the remaining liner from the adhesive strip, exposing the side that will attach to the wall.

Image: A hand presses a white Command Large Utility Hook firmly against a wall, demonstrating the application process.

Press the hook firmly against the prepared surface for 30 seconds. Apply pressure evenly across the entire hook to ensure full contact with the adhesive.

4. Curing Time

After applying the hook, wait 1 hour before hanging any items. This allows the adhesive to reach its maximum holding strength.

Kullanım Talimatları

Each Command Large Utility Hook can hold up to 5 pounds. They are suitable for a variety of items and surfaces.

Image: A visual guide showing compatible surfaces for Command hooks (painted walls, metal, painted concrete, laminate & finished wood, tile, smooth surfaces & glass) and incompatible surfaces (wallpaper, fabric, textured walls, brick, rough surfaces).

• Önerilen Kullanımlar: Hanging clipboards, brushes, dog leashes, kitchen utensils, home decor, accessories, and lightweight coats.
• Yüzeyler: Painted walls, finished wood, painted concrete cinder blocks, laminate, glass, metal, and tiles.
• Surfaces to Avoid: Wallpaper, fabric, textured walls, brick, or rough surfaces.

Image: A kitchen wall with several Command hooks holding kitchen items and a bag of fruit, demonstrating practical, damage-free organization.

Bakım

Command hooks require minimal maintenance. To clean the hooks, simply wipe them with a damp cloth. Avoid using harsh chemicals or abrasive cleaners, as these may damage the plastic or affect the adhesive properties if they come into contact with the strips.

Kaldırma İşlemi

To remove Command hooks without damaging your surfaces, follow these instructions carefully:

1. Lightly hold the top of the hook.
2. Slowly pull the adhesive strip straight down towards the floor. Do not pull the strip toward you or at an angle, as this may cause damage to the surface.
3. Continue pulling the strip until the hook releases from the wall. The strip will stretch up to several inches.

Image: A close-up of hands pulling the tab of a Command adhesive strip downwards, illustrating the proper technique for damage-free removal.

You can reuse your hook with new Command Refill Strips.

Sorun giderme

Hook Not Sticking

• Ensure the surface was cleaned with rubbing alcohol only, not household cleaners or water.
• Verify the surface is smooth and not textured, wallpapered, or fabric.
• Confirm the indoor temperature is within the recommended range (50°F to 105°F).
• Ensure you waited 1 hour after application before hanging items.
• Check that the weight of the item does not exceed 5 pounds.

Strip Breaks During Removal

If the adhesive strip breaks during removal, it may be due to pulling it too quickly or at an angle. To remove the remaining strip:

• Gently slide a piece of dental floss or fishing line behind the hook/strip.
• Work the floss/line back and forth in a sawing motion to separate the adhesive from the wall.

Özellikler

Garanti ve Destek

3M endüstriyel ve iş sağlığı ürünleri, eğitimli endüstriyel ve iş sağlığı müşterilerine işyeri kullanımı için tasarlanmış, etiketlenmiş ve paketlenmiştir. İlgili ürün ambalajında ​​veya literatüründe aksi açıkça belirtilmedikçe, bu ürünler tüketicilere (örneğin, ev, kişisel, ilkokul veya ortaokul, eğlence/spor veya ilgili ürün ambalajında ​​veya literatüründe açıklanmayan diğer kullanımlar için) satılmak veya kullanılmak üzere tasarlanmamış, etiketlenmemiş veya paketlenmemiştir ve ilgili sağlık ve güvenlik yönetmeliklerine ve standartlarına (örneğin, ABD OSHA, ANSI) ve tüm ürün literatürüne, kullanım talimatlarına, uyarılara ve diğer sınırlamalara uygun olarak seçilmeli ve kullanılmalıdır ve kullanıcı, herhangi bir geri çağırma, saha eylemi veya diğer ürün kullanım bildiriminde belirtilen tüm önlemleri almalıdır. 3M endüstriyel ve iş sağlığı ürünlerinin yanlış kullanımı yaralanmaya, hastalığa, ölüme veya maddi hasara neden olabilir. Ürün seçimi ve kullanımı konusunda yardım için, tesisinizdeki güvenlik uzmanına, endüstriyel hijyeniste veya diğer konu uzmanına danışın. Ek ürün bilgileri için ziyaret edin. www.3M.com.