Legrand 067001

Legrand 067001 Céliane VMC Switch Instruction Manual

Model: 067001 | Marka: Legrand

1. Giriş

This instruction manual provides essential information for the safe installation, operation, and maintenance of the Legrand 067001 Céliane VMC Switch. This device is designed for controlling Ventilation Mécanique Contrôlée (VMC) systems, operating at 230V with a 10AX current rating.

2. Güvenlik Bilgileri

WARNING: Risk of electric shock. Installation and maintenance should only be performed by a qualified electrician in accordance with national and local electrical codes.

  • Always disconnect power at the main circuit breaker before installing or servicing the switch.
  • Tüm bağlantıların güvenli ve düzgün bir şekilde yalıtıldığından emin olun.
  • Düğmeyi ıslak ellerle veya ıslakken çalıştırmayın.amp koşullar.
  • Bu ürün yalnızca iç mekan kullanımı için tasarlanmıştır (IP20 derecesi).
  • Belirtilen hacmi aşmayıntage (230V) or current (10A) ratings.

3. Paket İçeriği

  • 1 x Legrand 067001 Céliane VMC Switch Module

Note: Faceplate and mounting frame are typically sold separately and are required for complete installation.

4. Kurulum ve Kurulum

The Legrand 067001 switch is designed for wall or surface mounting. Proper installation is crucial for safety and functionality.

  1. Güç Bağlantısının Kesilmesi: Before beginning any installation, ensure the main power supply to the circuit is turned off at the circuit breaker. Verify with a voltage test cihazı.
  2. Montaj: Install the switch module into a compatible mounting box or frame (not included). This switch supports wall or surface mounting configurations.
  3. Kablo Bağlantıları:
    • Identify the Line (L) and Neutral (N) wires from your electrical supply.
    • Connect the electrical wires to the corresponding terminals on the switch module. The connection type is crimping. Ensure a secure and tight connection for each wire.
    • Refer to the wiring diagram provided with your VMC system or consult a qualified electrician for specific connection requirements.
  4. Modülü Güvenli Hale Getirin: Once wired, secure the switch module within its mounting frame or box.
  5. Ön Plakayı Yükleyin: Attach the decorative faceplate (not included) over the switch module.
  6. Gücü Geri Yükle: Kurulum tamamlandıktan ve tüm bileşenler güvenli bir şekilde yerine yerleştirildikten sonra, ana devre kesiciden elektriği tekrar açın.
Legrand 067001 Céliane VMC Switch module, showing internal components and connection terminals.

Image: Legrand 067001 Céliane VMC Switch module. This image displays the grey plastic housing, the internal mechanism, and the terminals for electrical connections, including 'N' for Neutral and 'L' for Line, indicating its wiring points.

5. Kullanım Talimatları

The Legrand 067001 is a push-button type switch with an ON-OFF operating mode, designed for controlling VMC systems. It features a call button with a luminous indicator.

  • Açma/Kapatma: Press the push-button to toggle the connected VMC system between ON and OFF states.
  • Işıklı Gösterge: The integrated luminous indicator provides visual feedback on the switch's status or can be used as a call button depending on the specific VMC system configuration.

6. Bakım

The Legrand 067001 VMC Switch requires minimal maintenance.

  • Temizlik: To clean the switch, gently wipe the surface with a soft, dry cloth. Do not use abrasive cleaners, solvents, or excessive moisture, as this can damage the switch or create an electrical hazard.
  • Denetleme: Anahtarda herhangi bir hasar, gevşek bağlantı veya renk değişimi belirtisi olup olmadığını periyodik olarak kontrol edin. Herhangi bir sorun gözlemlenirse, gücü kesin ve yetkili bir elektrikçiye danışın.

7. Sorun Giderme

If the switch or connected VMC system is not functioning correctly, consider the following:

  • Güç Yok: Check if the circuit breaker for the switch is tripped. Reset if necessary.
  • Anahtar Yanıt Vermiyor: Ensure all wiring connections are secure. Loose connections can prevent proper operation.
  • Luminous Indicator Not Working: Verify the wiring for the indicator light is correctly connected according to your VMC system's specifications.
  • Kalıcı Sorunlar: If troubleshooting steps do not resolve the issue, disconnect power and contact a qualified electrician for further assistance. Do not attempt repairs yourself.

8. Özellikler

ÖzellikŞartname
Model Numarası067001
MarkaLegrand
Çalışma Hacmitage230 Volt
Güncel Derecelendirme10 A (10AX)
Güç Derecelendirmesi1600 Watt
Çalışma ModuAÇIK KAPALI
Anahtar TürüBasmalı düğme
İletişim TürüNormalde Kapalı
Bağlayıcı TürüKıvrım
MalzemePlastic (housing), Copper (contact)
Montaj TipiWall Mount or Surface Mount
IP DerecelendirmesiIP20
Ağırlık6 Gram
RenkGri

9. Garanti ve Destek

For warranty information and technical support, please refer to the documentation provided with your purchase or contact Legrand customer service directly. Warranty terms may vary based on region and retailer.

You can find more information on the official Legrand webalan: www.legrand.com

© 2023 Legrand. Tüm hakları saklıdır. Bilgiler önceden haber verilmeksizin değiştirilebilir.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.