KayıtTag UTRIX-16 PDF Sıcaklık Veri Kaydedici Kullanım Kılavuzu

1. Giriş

GünlükTag UTRIX-16 is a high-performance, multi-use temperature data logger designed for reliable and accurate monitoring across a wide range of applications. This device records temperature data and generates comprehensive PDF reports without requiring special software or hardware. Its integrated USB connector allows for easy data transfer and configuration.

2. Güvenlik Bilgileri

• Do not expose the device to extreme physical shock or vibration.
• Avoid immersing the device in liquids.
• Cihazı açmaya veya üzerinde değişiklik yapmaya çalışmayın, aksi takdirde garanti geçersiz olur ve hasar meydana gelebilir.
• Pilleri yerel düzenlemelere göre atın.
• Ensure the USB connector is clean and dry before connecting to a computer.

3. Paket İçeriği

Paketin içinde tüm öğelerin mevcut olduğundan emin olun:

• KayıtTag UTRIX-16 PDF Temperature Data Logger
• Kullanım Kılavuzu (bu belge)

4. Cihaz Bittiview

The UTRIX-16 features a compact design with clear indicators and control buttons.

Şekil 1: Ön view of the LogTag UTRIX-16 PDF Temperature Data Logger. This image displays the device's front panel, showing the "ALERT" and "OK" indicator lights, and the "STOP" and "START/Mark" buttons. The LogTag brand and "USB PDF TEMPERATURE RECORDER" text are visible, along with a serial number barcode.

• ALERT Indicator: Flashes when a pre-configured temperature alert threshold has been exceeded.
• OK Indicator: Flashes to confirm normal operation and within-range temperature readings.
• Durdurma düğmesi: Press to stop the current logging session.
• START/Mark Button: Press to start a new logging session or to insert a mark into the data stream during logging.
• Integrated USB Connector: Located at the bottom, used for connecting to a computer for configuration and data download.

Şekil 2: GünlükTag UTRIX-16 with its integrated USB connector extended. This view highlights the USB-A plug, ready for connection to a computer's USB port, facilitating direct data transfer and device configuration.

5. Kurulum

5.1 İlk Yapılandırma

The UTRIX-16 is typically pre-configured for immediate use. However, for custom settings (e.g., logging interval, alert thresholds, start delay), you will need to use the LogTag Analyzer software. This software is available for download from the official LogTag webalan.

1. Download and install the LogTag Analiz yazılımı KayıtTag Recorders Software.
2. Connect the UTRIX-16 to a USB port on your computer.


Şekil 3: GünlükTag UTRIX-16 data logger connected to a computer's USB port. This illustrates the direct connection method for data download and configuration, eliminating the need for a separate interface cradle.

3. GünlükTag Analyzer software should automatically detect the connected device.
4. Follow the on-screen prompts within the software to configure logging parameters as needed.

5.2 Pil Bilgileri

The UTRIX-16 uses a CR2 battery (included). The battery is designed for long life and is generally not user-replaceable without specialized tools. If battery replacement is required, it is recommended to contact LogTag support or an authorized service center.

6. Operasyon

6.1 Starting a Logging Session

To start a new logging session:

1. Ensure the device is not currently logging (check the OK/ALERT indicators).
2. Basılı tutun BAŞLAT/İşaretle button for approximately 5 seconds until the OK indicator flashes rapidly.
3. Release the button. The OK indicator will flash at regular intervals, indicating that logging has started.

6.2 Stopping a Logging Session

To stop an active logging session:

1. Basılı tutun DURMAK button for approximately 5 seconds until the ALERT indicator flashes rapidly.
2. Release the button. The device will cease logging.

6.3 Marking Data

During an active logging session, you can insert a mark into the data stream:

• Kısaca basın BAŞLAT/İşaretle button (less than 2 seconds).
• A mark will be recorded in the data, visible when the data is downloaded and analyzed.

7. Data Retrieval and Reporting

The UTRIX-16 generates a PDF report directly when connected to a computer.

1. Connect the UTRIX-16 to a USB port on your computer.
2. Cihaz, çıkarılabilir bir sürücü olarak görünecektir.
3. Locate and open the generated PDF report file. This report contains a summary of the logging session, temperature graphs, and statistical data.
4. For advanced analysis and configuration, use the LogTag Analiz yazılımı.

8. Bakım

8.1 Temizlik

Cihazı yumuşak bir bezle temizleyin.amp bezle silin. Aşındırıcı temizleyiciler veya çözücüler kullanmayın.

8.2 Pil Değişimi

The battery in the UTRIX-16 is designed for extended use and is not intended for user replacement. If the battery life is depleted, contact LogTag support for service options.

9. Sorun Giderme

10. Özellikler

11. Garanti ve Destek

KayıtTag products are manufactured to high standards. For warranty information and technical support, please refer to the official LogTag webSatın alma belgesi olarak satın alma fişinizi saklayın veya yerel distribütörünüzle iletişime geçin.

Official LogTag Webalan: www.logtag-kayıtçılar.com