Aqua Control Irrigation Programmer C4099N User Manual

1. Giriş

The Aqua Control C4099N Irrigation Programmer is designed to automate your garden watering system, providing convenience and efficiency. This device allows you to set precise watering frequencies and durations, adapting to the specific needs of your plants and garden. Its robust design ensures reliable performance and ease of use.

Şekil 1: Ön view of the Aqua Control C4099N Irrigation Programmer.

2. Güvenlik Bilgileri

• Her zaman kullan alkalin piller. Şarj edilebilir piller kullanmayın.
• Asla şarj edilemeyen pilleri şarj etmeye çalışmayın.
• Ensure the battery compartment is securely sealed to prevent water ingress.
• The programmer requires a minimum water pressure of 1 bar and can withstand a maximum of 8 bar for proper operation. It can open at 0 bar, making it suitable for water containers.
• Çocukların erişemeyeceği yerde saklayınız.

3. Paket İçeriği

Paketin içinde tüm öğelerin mevcut olduğundan emin olun:

• Aqua Control C4099N Irrigation Programmer
• Kullanım Kılavuzu (bu belge)

Figure 2: The Aqua Control C4099N Irrigation Programmer as packaged.

4. Ürün Özellikleri

The Aqua Control C4099N offers a range of features designed for optimal watering control:

• Yüksek Kaliteli Malzemeler: Constructed for extended product life.
• Internal Ball Mechanism: Ensures reliable water inlet opening and closing.
• Control Panel Cover: Provides enhanced protection from water and elements.
• Waterproof Battery Compartment: Features a bilabial seal to prevent water from entering the internal circuit.
• Gecikme İşlevi: Allows delaying the start of watering from 1 to 12 hours.
• Seçilebilir Frekans: Options include every 1, 2, 3, 4, 5, 6, 8, 12, 24, 48, 72 hours, or once a week.
• Selectable Duration: Watering times of 1, 2, 3, 5, 10, 15, 20, 30, 60, 90, or 120 minutes.
• Manuel İşlem: Ability to manually open and close the water flow.
• Ergonomic Selector Switches: Designed for easy operation and secure grip, even with wet hands.
• Güvenlik Mekanizması: Prevents opening when batteries are depleted.

Figure 3: The programmer with its protective cover open, revealing the control dials.

5. Kurulum

5.1 Pil Kurulumu

1. Locate the battery compartment on the back of the programmer.
2. Carefully open the waterproof battery compartment cover.
3. Sokmak 2 x 1.5V AAA alkalin pilDoğru kutupluluğun (+/-) sağlanması.
4. Securely close the battery compartment cover, ensuring the bilabial seal is properly seated to maintain waterproofing.

5.2 Installation to Tap

1. Screw the top connector of the programmer onto your outdoor tap. Ensure a tight, leak-free connection.
2. Connect your garden hose or irrigation system to the bottom outlet of the programmer.
3. Ensure the tap is fully open to allow sufficient water pressure for the programmer to operate correctly (minimum 1 bar).

Figure 4: The irrigation programmer correctly installed on a garden tap.

6. Kullanım Talimatları

6.1 Setting Watering Frequency

Rotate the left dial, labeled 'Frecuencia' (Frequency), to select how often you want the watering cycle to occur. Options include:

• Every 1, 2, 3, 4, 5, 6, 8, 12, 24, 48, 72 hours
• Once a week (indicated by a clock icon)

6.2 Setting Watering Duration

Rotate the right dial, labeled 'Duración' (Duration), to select the length of each watering cycle. Options include:

• 1, 2, 3, 5, 10, 15, 20, 30, 60, 90, or 120 minutes

6.3 Gecikme Fonksiyonu

The programmer features a delay function. After inserting batteries, the programmer takes the exact time as the start time. You can delay the start of the first watering cycle from 1 to 12 hours using the 'Delay' button (if available, or by adjusting the start time through battery insertion).

6.4 Manuel Çalıştırma

To manually open or close the water flow, use the designated manual button or lever on the programmer. This allows for immediate watering outside of the programmed schedule.

6.5 Sıfırlama Fonksiyonu

To reset the programmer, locate the 'Reset' button (often a small pinhole) and press it with a thin object. This will clear all settings and return the unit to its default state.

7. Bakım

• Temizlik: Wipe the exterior of the programmer with a damp Bezle temizleyin. Aşındırıcı temizleyiciler kullanmayın ve cihazı suya batırmayın.
• Pil Değişimi: Replace batteries when the low battery indicator illuminates or when the programmer stops functioning as expected. Always use new alkaline batteries.
• Kış Deposu: During freezing temperatures, disconnect the programmer from the tap and store it indoors to prevent damage from ice expansion.

Figure 5: Components of the programmer, including the inlet filter, which should be checked periodically for debris.

8. Sorun Giderme

9. Özellikler

• Model Numarası: C4099N
• Boyutlar: 10x10x16 cm
• Ürün Ağırlığı: 300 Gram
• Malzeme: Metal (iç bileşenler), Dayanıklı Plastik (gövde)
• Güç Kaynağı: 2 adet 1.5V AAA alkalin pil (dahil değildir)
• Çalışma Basıncı: 1 - 8 bar (opens at 0 bar)
• Sulama Sıklığı Seçenekleri: 1, 2, 3, 4, 5, 6, 8, 12, 24, 48, 72 hours, or once a week
• Watering Duration Options: 1, 2, 3, 5, 10, 15, 20, 30, 60, 90, 120 minutes
• Üretici: Altadex
• GTIN: 08426375240995

10. Garanti

The Aqua Control C4099N Irrigation Programmer comes with a 2 Yıllık Garanti Satın alma tarihinden itibaren üretim hatalarını da kapsayan garanti kapsamındadır. Lütfen garanti talepleriniz için satın alma belgenizi saklayın.

Figure 6: The product highlighting its 2-year warranty and waterproof design.

11. Destek Bilgileri

For technical support, inquiries, or warranty claims, please contact the manufacturer:

• Üretici: Altadex SA
• Webalan: www.altadex.com

Figure 7: Product packaging displaying manufacturer and webSite bilgisi.