APC Back-UPS BX1400UI User Manual

1. Giriş

The APC Back-UPS BX1400UI is an Uninterruptible Power Supply (UPS) designed to protect your electronic equipment from power outages, surges, and spikes. Featuring Line Interactive Technology and Automatic Voltage Regulation (AVR), this unit provides reliable battery backup and surge protection for connected devices. It includes six IEC 320 C13 outlets, a USB interface for communication, and data line protection.

Şekil 1: Ön view of the APC Back-UPS BX1400UI.

2. Önemli Güvenlik Bilgileri

• Elektrik Tehlikesi: Bu ünite yüksek hacimlitage components. Do not attempt to open the UPS casing, especially when connected to power. Refer all servicing to qualified personnel.
• Doğrudan Bağlantı: Always connect the UPS directly to a wall outlet. Do not use surge protectors, extension cords, or power strips with the UPS input.
• Havalandırma: UPS'in çevresinde yeterli havalandırma olduğundan emin olun. Havalandırma açıklıklarını kapatmayın.
• İlk Koku: A new unit may emit a distinct odor, often described as similar to burnt plastic. This is normal and typically dissipates after a few weeks of continuous operation in a well-ventilated area. It is not indicative of a malfunction.
• Pil Değişimi: User-performed battery replacement during the warranty period will void the product warranty. Refer to the Maintenance section for details.

3. Paket İçeriği

Paketinizin aşağıdaki öğeleri içerdiğini doğrulayın:

• APC Back-UPS BX1400UI Unit
• Two (2) IEC-C13 to IEC-C14 power cables (for connecting devices to the UPS)
• Kullanım Kılavuzu (bu belge)

Not: The input power cable (for connecting the UPS to the wall outlet) and the USB communication cable are typically dahil değil and must be purchased separately if needed.

4. Kurulum

4.1. Unpacking and Battery Connection

1. UPS paketini dikkatlice ambalajından çıkarın.
2. Locate the yellow battery connector on the rear panel of the UPS. This connector is typically disconnected for safe transport.
3. Push the yellow battery connector firmly into its socket until it clicks into place. This activates the UPS battery circuits.

4.2. Güce Bağlanmak

1. Connect the UPS to a grounded 230V AC wall outlet using an appropriate IEC-320 C14 input power cable (not included).
2. Ensure the connection is direct to the wall outlet. Do not use surge protectors or extension cords.
3. Allow the UPS to charge for at least 10 hours before connecting critical equipment to ensure full battery runtime.

4.3. Ekipmanların Bağlantısı

The BX1400UI features six IEC 320 C13 outlets for connecting your devices.

• Akü Yedekleme ve Aşırı Gerilim Korumalı Prizler: All six IEC-C13 outlets provide both battery backup and surge protection. Connect your computer, monitor, and other critical electronics to these outlets.
• Data Line Protection: The rear panel includes RJ-11 ports labeled "DSL/Modem/Fax/Phone" for protecting your telephone or DSL line from surges. These ports are not suitable for Ethernet network connections.
• USB Arayüzü: Connect a USB Type B cable (not included) from the UPS to your computer for communication and to enable shutdown software functionality.

Figure 2: Rear panel connections of the APC Back-UPS BX1400UI.

5. Kullanım Talimatları

5.1. Açma/Kapama

• Açmak İçin: Press and hold the power button on the front panel until you hear a short beep. The UPS will perform a self-test, and the 'On Line' LED will illuminate green.
• Kapatmak İçin: Press and hold the power button until the UPS powers down.

5.2. LED Göstergeleri

The front panel features LED indicators to show the UPS status:

• Çevrimiçi (Yeşil LED): Indicates the UPS is operating on utility power and providing power to connected equipment.
• On Battery (Yellow LED): Indicates the UPS is operating on battery power during a power outage or brownout. A humming noise is normal during battery operation.
• Pili Değiştirin (Kırmızı LED): Pilinin değiştirilmesi gerektiğini gösterir.
• Aşırı Yük (Kırmızı LED): Bağlı ekipmanın UPS'in kapasitesini aştığını gösterir. Gerekli olmayan ekipmanı derhal ayırın.

5.3. Otomatik Sestage Yönetmelik (AVR)

UPS, küçük voltaj dalgalanmalarını otomatik olarak düzeltir.tage fluctuations (sags and surges) without switching to battery power, thus preserving battery life. If voltage fluctuations exceed the AVR's correction range, the UPS will switch to battery power.

6. Temel Özellikler

• Line Interactive Technology: Provides stable power by regulating voltage without constantly switching to battery.
• Otomatik Sestage Yönetmelik (AVR): Küçük hacim hatalarını düzeltir.tagPil gücü kullanmadan e dalgalanmalarını kontrol etme.
• Pil Yedekleme: Supplies power to connected equipment during outagee.
• Aşırı Gerilim Koruması: Protects connected devices from damaging power surges and spikes.
• 6 IEC 320 C13 Outlets: Standard outlets for computer equipment.
• USB Arayüzü: Enables communication with a computer for monitoring and controlled shutdown.
• Data Line Protection: Safeguards telephone/DSL lines from surges.

7. Yazılım Kullanımı

The APC Back-UPS BX1400UI supports USB Human Interface Device (HID) class specifications, allowing it to be recognized by most operating systems without special drivers.

7.1. APC PowerChute Personal Edition (Windows)

For advanced monitoring and management on Windows systems, download the APC PowerChute Personal Edition software from the official APC webSite. Bu yazılım şunları yapmanıza olanak tanır:

• Monitor UPS status, power consumption, and battery charge.
• Uzun süreli elektrik kesintilerinde bilgisayarınızın otomatik olarak kapanmasını yapılandırın.tagee.
• Adjust UPS settings, such as alarm behavior (e.g., disable the beeper during battery operation).
• Perform self-tests to ensure proper UPS functionality.

7.2. Linux Support (apcupsd / NUT)

For Linux environments, the UPS can be managed using `apcupsd` or Network UPS Tools (NUT). These tools provide similar monitoring and shutdown capabilities. Refer to the documentation for `apcupsd` or NUT for configuration details, typically involving specifying `UPSCABLE usb` and `UPSTYPE usb` for `apcupsd`, or using the `usbhid-ups` driver for NUT.

8. Bakım

8.1. Pil Değişimi

The APC Back-UPS BX1400UI uses two 12V 7.2Ah sealed lead-acid batteries. The recommended replacement battery pack is APC RBC113.

• During Warranty: If the unit is still under its 2-year warranty, battery replacement must be performed by Schneider Electric IT (SEIT) customer service. User-performed battery replacement during the warranty period will automatically void the warranty.
• After Warranty: After the warranty period, batteries can be replaced by the user. However, due to the presence of high voltage components even when disconnected, it is highly recommended that this operation be performed by specialized personnel. If you choose to replace the batteries yourself, exercise extreme caution.
• Prosedür Bittiview (for experienced users only): Disconnect the UPS from all power sources and connected equipment. Disconnect the yellow battery connector. Remove the rear panel screws, then the front panel (which is snap-fitted), and additional screws. Carefully access the battery compartment. Note the orientation and wiring of the existing batteries (taking photos is recommended) to ensure correct installation of the new batteries.

8.2. Devre Kesicinin Sıfırlanması

In case of an overload, the UPS may trip its circuit breaker. To reset, disconnect some equipment from the UPS, then press the circuit breaker button located on the rear panel (refer to Figure 2).

9. Sorun Giderme

For more detailed troubleshooting, refer to the complete user manual available on the APC webalan.

10. Özellikler

Figure 3: Typical runtime graph for APC Back-UPS 1400VA.

11. Garanti ve Destek

11.1. Ürün Garantisi

The APC Back-UPS BX1400UI comes with a 2 yıllık sınırlı garanti Satın alma tarihinden itibaren geçerlidir. Bu garanti, normal kullanım koşullarındaki malzeme ve işçilik kusurlarını kapsar. Garanti talepleriniz için lütfen satın alma belgenizi saklayın.

Önemli: Unauthorized opening of the unit or user-performed battery replacement during the warranty period will void the warranty.

11.2. Teknik Destek

For technical assistance, troubleshooting, or warranty service, please contact APC by Schneider Electric customer support. Visit the official APC website for contact information specific to your region, including phone numbers and online support resources.

Online resources often include FAQs, knowledge bases, and downloadable manuals that can provide further assistance.