UBBINK 1355164

Ubbink FiltraClear 2500 PlusSet Pond Filter System User Manual

Modeli: 1355164

1. Giriş

The Ubbink FiltraClear 2500 PlusSet is a complete gravity filtration unit designed for ponds up to 2500 liters without fish. This system provides essential mechanical and biological filtration, combined with a UVC unit, to maintain clear and healthy pond water. This manual provides instructions for the safe installation, operation, and maintenance of your FiltraClear 2500 PlusSet.

Ubbink FiltraClear 2500 PlusSet Pond Filter System retail box

This image shows the retail packaging for the Ubbink FiltraClear 2500 PlusSet. The box highlights key features such as the UVC unit, pump, and suitability for ponds up to 2500 liters.

2. Paket İçeriği

Please check the package contents carefully upon unpacking. The FiltraClear 2500 PlusSet includes the following components:

  • 1x FiltraClear 2500 Gravity Filter Unit (2 chambers)
  • 1x UVC Unit (5W)
  • 1x Elimax 500 Pond Pump
  • 1x Zeolith Filter Media
  • 1x Connection Hose (3 meters, for pump to filter)
  • 1x Discharge Pipe (1 meter, for filter to pond)
  • Clamps and End Caps (necessary for connections)

3. Özellikler

ŞartnameDeğer
ÜreticiKÜÇÜK BİNK
Parça Numarası1355164
Model Numarası1355164
Pond Volume (without fish)2500 litreye kadar
UVC Gücü5W
Pompa ModeliElimax 500
Number of Filter Chambers2
Ağırlık31 Kilogram
İlk Mevcut Tarih3 Şubat 2015

4. Güvenlik Talimatları

Yaralanma veya hasarı önlemek için her zaman aşağıdaki güvenlik önlemlerine uyun:

  • Elektriksel Güvenlik: Ensure all electrical connections are waterproof and protected from moisture. Always disconnect power before performing any maintenance or installation.
  • UVC Unit: Never look directly into the UVC lamp when it is operating, as UV radiation can cause eye damage. The UVC unit must only be operated when fully submerged or enclosed within the filter housing.
  • Atama: Position the filter and pump on a stable, level surface. The filter unit must be placed above the pond's water level for gravity return.
  • Çocuklar ve Evcil Hayvanlar: Keep children and pets away from the pond equipment during operation and maintenance.
  • Zarar: Do not operate the unit if any part is damaged, especially electrical cables or the UVC lamp. Contact customer support for replacement parts.

5. Kurulum

Follow these steps to set up your FiltraClear 2500 PlusSet:

  1. Filtrenin Konumlandırılması: Place the FiltraClear 2500 filter unit on a stable, level surface next to your pond. Ensure the filter's outlet is positioned so that filtered water can flow back into the pond by gravity. The top edge of the filter must be above the pond's water level.
  2. Pompanın Kurulumu: Place the Elimax 500 pump in the deepest part of your pond, ensuring it is stable and not drawing in excessive debris from the pond bottom.
  3. Connecting the Pump to the Filter: Connect one end of the 3-meter connection hose to the outlet of the Elimax 500 pump. Secure it with a clamp. Connect the other end of this hose to the inlet of the FiltraClear 2500 filter unit. Secure this connection with a clamp.
  4. Installing the UVC Unit: The 5W UVC unit is integrated into the filter housing. Ensure the UVC lamp is correctly seated and the quartz sleeve is clean and undamaged.
  5. Connecting the Filter to the Pond: Connect the 1-meter discharge pipe to the outlet of the FiltraClear 2500 filter unit. Secure it with a clamp. Direct the other end of this pipe into your pond, ensuring the filtered water returns smoothly.
  6. Elektrik Bağlantıları: Once all hoses are securely connected and the filter is correctly positioned, connect the pump and UVC unit to a suitable, weatherproof outdoor power outlet. Ensure a drip loop is formed with the cables to prevent water from running into the outlet.
Diagram illustrating various Ubbink pond filtration systems and components

Bu diyagram genel bir bakış sunmaktadır.view of different Ubbink pond filtration setups, including pumps, filters, and UVC units. It visually represents how components connect and function within a pond environment, showing small, medium, and large pond configurations, as well as waterfall and cascade options. The FiltraClear 2500 PlusSet components are part of these general system types.

6. Kullanım Talimatları

After successful setup, follow these steps for initial operation:

  • Ilk başlangıç: Plug in the power cords for both the pump and the UVC unit. The pump will begin to draw water from the pond and transport it to the filter. Water will then flow through the filter media and the UVC unit before returning to the pond.
  • İzleme: Observe the water flow from the filter outlet. Ensure there are no leaks and that water is flowing freely.
  • UVC Indicator: The UVC unit typically has a small indicator light to show that the lamp is operating. Do not look directly at the UVC lamp.
  • Sürekli Çalışma: For optimal pond health, the filter system should operate continuously, 24 hours a day, 7 days a week, during the pond season.

7. Bakım

Regular maintenance is crucial for the efficient operation and longevity of your filter system:

  • Filter Media Cleaning: Periodically check the filter media (sponges, Zeolith). When they become heavily soiled and water flow is reduced, clean them by rinsing with pond water (not tap water, to preserve beneficial bacteria). Frequency depends on pond load, typically every 2-4 weeks.
  • UVC-Lamp Yenisiyle değiştirme: The effectiveness of the UVC lamp diminishes over time. Replace the 5W UVC lamp approximately every 8000 operating hours or annually, preferably in spring, to ensure optimal algae control.
  • Kuvars Kol Temizliği: When replacing the UVC lamp, also clean the quartz sleeve that protects the lamp. Use a soft cloth and a mild cleaning solution to remove any mineral deposits or algae buildup.
  • Pompa Temizliği: Disconnect the pump from power. Remove the pump from the pond and disassemble it according to the pump's specific instructions. Clean the impeller and pump housing to remove any debris or calcium buildup.
  • Kışlama: Before the first frost, disconnect and clean the pump, UVC unit, and filter. Store them in a frost-free location. Drain all water from hoses and the filter unit to prevent freezing damage.

8. Sorun Giderme

İşte bazı yaygın sorunlar ve bunların çözümleri:

SorunOlası NedenÇözüm
Filtreden gelen su akışında azalmaClogged filter media or pump impellerClean filter media and pump impeller. Check hoses for blockages.
Pond water remains cloudy/greenUVC lamp ineffective, filter media saturated, or pond overloadedUVC l'yi değiştirinamp. Clean filter media thoroughly. Check pond size suitability.
UVC indicator light offUVC lamp burned out, faulty ballast, or no powerCheck power supply. Replace UVC lamp. Contact support if ballast is suspected.
Bağlantılardan su sızıyorgevşek clamps or damaged sealsSıkılaştırınamps. Inspect and replace any damaged seals or O-rings.

9. Garanti ve Destek

Ubbink products are manufactured to high-quality standards. This product comes with a manufacturer's warranty against defects in materials and workmanship. Please refer to the warranty card included with your product for specific terms and conditions.

For technical support, spare parts, or warranty claims, please contact your retailer or the Ubbink customer service department. Keep your proof of purchase (receipt) handy when contacting support.

Üretici: KÜÇÜK BİNK

Model Numarası: 1355164

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.