BLACK+DECKER D988 Finishing Attachment Sander Instruction Manual

giriiş

This manual provides essential instructions for the safe and effective use of your BLACK+DECKER D988 Finishing Attachment Sander. Please read this manual thoroughly before operating the tool and retain it for future reference.

Önemli Güvenlik Bilgileri

Yangın, elektrik çarpması ve kişisel yaralanma riskini azaltmak için her zaman temel güvenlik önlemlerine uyun.

• Göz koruması kullanın.
• Kulak koruyucu kullanın.
• İş parçasının güvenli bir şekilde temizlendiğinden emin olunamped.
• Ellerinizi hareketli parçalardan uzak tutun.
• Aksesuar değiştirmeden veya bakım yapmadan önce aleti güç kaynağından ayırın.
• Sadece önerilen aksesuarları kullanın.

Kurmak

Image showing the BLACK+DECKER D988 Finishing Attachment Sander, a compact sanding head designed to attach to a compatible power unit.

Paket açma

Carefully remove the finishing attachment sander and all accessories from the packaging. Inspect for any damage.

Attaching to Power Unit

The D988 is an attachment. Ensure your BLACK+DECKER power unit is compatible.

1. Align the attachment with the power unit's drive shaft.
2. Push the attachment firmly onto the power unit until it clicks into place.
3. Verify the attachment is securely fastened before use.

Attaching Sanding Sheets

The D988 uses hook-and-loop sanding sheets.

1. Ensure the power unit is disconnected from the power supply.
2. Peel off the old sanding sheet if present.
3. Align the new sanding sheet with the base of the attachment, ensuring the holes (if any) match for dust extraction.
4. Press the sanding sheet firmly onto the hook-and-loop base.

Kullanım Talimatları

Genel Operasyon

Connect the power unit to a suitable power source.

Aleti iki elinizle sıkıca tutun.

Place the sanding base flat on the workpiece before starting the tool.

Move the sander slowly and evenly over the surface. Avoid applying excessive pressure, as this can reduce efficiency and damage the workpiece or tool.

For optimal results, sand with the grain of the wood.

Toz Emme

If your power unit or attachment has a dust extraction port, connect a suitable dust bag or vacuum cleaner to minimize dust exposure.

Bakım

Düzenli bakım, aletinizin optimum performansını sağlar ve ömrünü uzatır.

Temizlik

After each use, disconnect the tool from the power supply.

Aletin dışını reklamla silinamp bez. Sert kimyasallar veya aşındırıcı temizleyiciler kullanmayın.

Clear any dust buildup from the ventilation openings to prevent overheating.

Sanding Pad Inspection

Periodically inspect the hook-and-loop sanding pad for wear or damage. A worn pad will not hold sanding sheets effectively. Replace if necessary.

Depolamak

Aleti çocukların erişemeyeceği, kuru ve güvenli bir yerde saklayın.

Sorun giderme

Özellikler

• Modeli: D988
• Marka: SİYAH+DECKER
• Ürün Ağırlığı: 500 gram
• Maksimum Dönme Hızı: 10000 dev/dak
• ASIN: B00IQQ92IG
• Üretici: Siyah & Decker

Garanti ve Destek

For warranty information or technical support, please refer to the documentation provided with your BLACK+DECKER power unit or visit the official BLACK+DECKER webalan.

This attachment is covered by the standard BLACK+DECKER warranty applicable to its power tool system.