1. Giriş
This manual provides detailed instructions for the installation, operation, and maintenance of the Seco-Larm Enforcer SK-3523-SDQ Heavy-Duty Access Control Keypad. Please read this manual thoroughly before installation and operation to ensure proper functionality and safety.
The SK-3523-SDQ is a robust, outdoor-rated access control keypad designed for secure entry management. It supports up to 210 users and features a durable stainless steel faceplate and a rugged cast-aluminum housing.
2. Güvenlik Bilgileri
Cihazın hasar görmesini önlemek ve kullanıcı güvenliğini sağlamak için aşağıdaki güvenlik önlemlerine uyun:
- Elektriksel Güvenlik: Disconnect power before installation or servicing. All wiring should comply with local electrical codes.
- Çevresel Koşullar: Although designed for outdoor use, avoid direct exposure to extreme weather conditions if possible. Ensure proper sealing during installation to maintain its weather resistance.
- Yetkili Personel: Installation and maintenance should only be performed by qualified technicians.
- Güç Kaynağı: Yalnızca belirtilen güç kaynağı hacmini kullanıntage and current ratings to avoid damage.
3. Paket İçeriği
Paketin içinde tüm öğelerin mevcut olduğundan emin olun:
- Seco-Larm Enforcer SK-3523-SDQ Keypad Unit
- Montaj Vidaları ve Ankrajları
- Diode (for inductive loads)
- Kullanım Kılavuzu (bu belge)
- Security Key (for accessing internal components)
4. Kurulum ve Kurulum
Proper installation is crucial for the keypad's performance and longevity.
4.1 Tuş Takımının Montajı
- Konum seç: Select a flat, secure surface for mounting, typically near the access point. Ensure adequate space for wiring.
- Yüzeyi Hazırlayın: Use the keypad as a template to mark drilling points for mounting screws.
- Matkap Delikleri: Drill pilot holes for the mounting screws and a larger hole for wiring access.
- Güvenli Tuş Takımı: Mount the keypad securely using the provided screws and anchors. Ensure the unit is level.
Resim 1: Ön view of the Seco-Larm Enforcer SK-3523-SDQ Heavy-Duty Access Control Keypad. It features a stainless steel faceplate with a 12-button numeric keypad, a key lock at the top, and three indicator LEDs (green, yellow, red) above the keypad. The housing is black and rugged.
4.2 Kablo Bağlantıları
Refer to the wiring diagram provided with the product for specific connections. General steps include:
- Güç Bağlantısı: Connect the keypad to a stable 12-24 VDC power supply. Observe polarity.
- Lock Connection: Connect the keypad's output relays to the electric lock or gate operator. Use the provided diode for inductive loads to prevent back-EMF damage.
- Çıkış Düğmesi: Connect an optional exit button to the designated terminals.
- Alarm/Auxiliary Output: Connect to an alarm system or other auxiliary devices if required.
Not: Always ensure power is disconnected before making any wiring changes.
5. Kullanım Talimatları
5.1 Programlama Modları
The keypad operates in two main modes: Normal Mod (for access) and Programlama modu (for configuration).
- Programlama Moduna Giriş: Enter the Master Code followed by '#'. The yellow LED will illuminate.
- Programlama Modundan Çıkış: Press '#' or wait for 10 seconds of inactivity.
5.2 Kullanıcı Kodu Yönetimi
The keypad supports up to 210 user codes.
- Kullanıcı Kodu Ekleme:
- Programlama Moduna girin.
- Press '1' (Add User Code).
- Enter a 4-8 digit User Code.
- Press '#'. The green LED will flash to confirm.
- Kullanıcı Kodunu Silme:
- Programlama Moduna girin.
- Press '2' (Delete User Code).
- Silinecek Kullanıcı Kodunu giriniz.
- Press '#'. The red LED will flash to confirm.
5.3 Granting Access
To gain access, users must enter their valid user code followed by '#'.
- Successful Entry: The green LED will illuminate, and the lock will activate for the programmed duration.
- Unsuccessful Entry: The red LED will flash, and access will be denied.
6. Bakım
The SK-3523-SDQ keypad is designed for minimal maintenance. However, regular checks can extend its lifespan:
- Temizlik: Tuş takımının yüzeyini yumuşak bir bezle silin.amp Bez. Aşındırıcı temizleyicilerden veya çözücülerden kaçının.
- Kablolama Denetimi: Periodically check wiring connections for corrosion or damage, especially in outdoor environments.
- İşlevsellik Testi: Test the keypad's operation and lock activation regularly to ensure proper function.
7. Sorun Giderme
| Sorun | Olası Neden | Çözüm |
|---|---|---|
| Keypad does not power on. | Güç kaynağı yok; yanlış kablolama; arızalı güç kaynağı. | Güç bağlantılarını kontrol edin; güç kaynağı hacmini doğrulayıntage; doğru polariteyi sağlayın. |
| Keypad accepts code but lock does not activate. | Incorrect lock wiring; faulty lock; relay issue. | Verify lock wiring; test the lock independently; check keypad relay output. |
| Cannot enter Programming Mode. | Incorrect Master Code; keypad malfunction. | Ensure correct Master Code is used; reset keypad to factory defaults (refer to full manual for procedure). |
| Keypad buttons are unresponsive. | Fiziksel hasar; iç arıza. | Inspect for damage; contact technical support if issue persists. |
8. Özellikler
- Modeli: SK-3523-SDQ
- Marka: Seco-Larm Enforcer
- Giriş Voltage: 12-24 VDC
- Güncel Çekiliş: Standby: 20mA, Active: 80mA
- Kullanıcı Kapasitesi: 210 (1 Master, 209 User Codes)
- Çıkış Röleleri: 1 (NO/NC, 2A @ 30VDC)
- Konut: Cast-aluminum, stainless steel faceplate
- Çevre: Açık havada derecelendirildi
- Boyutlar: (Kesin ölçüler için ürün diyagramına bakınız)
9. Garanti ve Destek
Seco-Larm products are warranted against defects in material and workmanship under normal use for a period of one (1) year from the date of sale to the original customer. For technical support or warranty claims, please contact Seco-Larm customer service or visit their official webalan.
Webalan: www.seco-larm.com