Seiko Clocks QHR201S

Seiko Clocks QHR201S Alarm Clock User Manual

giriiş

This manual provides detailed instructions for the setup, operation, and maintenance of your Seiko Clocks QHR201S Alarm Clock. This analog alarm clock features radio wave control for accurate timekeeping and a convenient backlight function. Please read this manual thoroughly before using your new alarm clock.

Güvenlik Bilgileri

  • Saatinizi aşırı sıcaklıklara, doğrudan güneş ışığına ve yüksek neme maruz bırakmayın.
  • Saati düşürmekten veya sert darbelere maruz bırakmaktan kaçının.
  • Saati güçlü manyetik alanlardan uzak tutun.
  • Saati kendiniz sökmeye veya tamir etmeye çalışmayın. Yetkili servis personeline başvurun.
  • Kullanılmış pilleri yerel düzenlemelere göre atın.

Paket İçeriği

Lütfen paketin içindeki tüm ürünlerin eksiksiz olduğundan emin olun:

  • Seiko Clocks QHR201S Alarm Clock
  • 1 x AA Pil
  • Kullanım Kılavuzu (bu belge)

Ürün Bittiview

The Seiko Clocks QHR201S is a compact, modern analog alarm clock designed for clarity and ease of use. Its radio wave control feature ensures precise timekeeping.

Seiko Clocks QHR201S alarm clock, front view, silver casing with white analog dial, black hands, and a button on the top right.
Şekil 1: Ön view of the Seiko Clocks QHR201S Alarm Clock. The clock features a silver rectangular casing, a white analog dial with black hour, minute, and second hands, and clear black numerals. The text "SEIKO" and "RADIO WAVE CONTROL" are visible on the dial. A circular button is located on the top right of the casing.

Key components include the analog dial for time display, control knobs/buttons (typically on the back or side) for setting time and alarm, and a top button for backlight activation and snooze function.

Kurmak

1. Pil Kurulumu

  1. Saatin arka tarafında bulunan pil bölmesi kapağını bulun.
  2. Remove the cover by sliding or lifting it.
  3. Bir adet AA pil takın ve pozitif (+) ve negatif (-) kutupların bölmenin içindeki işaretlerle doğru şekilde hizalandığından emin olun.
  4. Pil bölmesi kapağını güvenli bir şekilde yerine takın.

2. Initial Time Setting (Radio Wave Control)

Upon battery installation, the clock will automatically attempt to receive the radio time signal. This process may take several minutes to an hour, depending on your location and signal strength. During this time, the hands may move rapidly until the correct time is set.

  • Daha iyi sinyal alımı için saati bir pencere yakınına yerleştirin.
  • Saati, parazite neden olabilecek elektronik cihazların yakınına koymaktan kaçının.
  • Once the signal is received, the clock will automatically adjust to the correct local time, including daylight saving time changes.

Kullanım Talimatları

Alarmı Ayarlama

  1. Locate the alarm setting knob, usually on the back of the clock.
  2. Rotate the knob to move the alarm hand to your desired alarm time.
  3. Locate the alarm ON/OFF switch (often a small slider or button). Set it to the ON position to activate the alarm.

Arka Işığı Kullanma

Press the button located on the top right of the clock casing to activate the backlight. The backlight will illuminate the dial for a few seconds, allowing you to read the time in low-light conditions.

Erteleme Fonksiyonu

When the alarm sounds, press the top button to activate the snooze function. The alarm will temporarily stop and sound again after a few minutes (typically 5-10 minutes).

Alarmı Durdurma

To completely stop the alarm, move the alarm ON/OFF switch to the OFF position.

Bakım

Temizlik

Saatin c'sini silin.asing with a soft, dry cloth. Do not use abrasive cleaners, solvents, or chemical sprays, as these can damage the finish.

Pil Değişimi

Replace the AA battery when the clock's display becomes dim, the backlight weakens, or the clock stops functioning. Follow the battery installation steps outlined in the Setup section.

Sorun giderme

  • Saat doğru zamanı göstermiyor: Ensure the battery is correctly installed and has sufficient power. Allow time for the radio wave signal to be received. Try moving the clock to a different location, preferably near a window.
  • Alarm çalmıyor: Check that the alarm ON/OFF switch is in the ON position. Verify that the alarm time is set correctly.
  • Arka ışık çalışmıyor: Replace the battery if it is low. Ensure the top button is being pressed firmly.
  • No radio signal reception: Ensure the clock is not near sources of interference (e.g., TVs, computers, large metal objects). Try repositioning the clock.

Özellikler

  • Marka: Seiko Clocks
  • Model Numarası: QHR201S
  • Renk: Gümüş
  • Boyutlar (U x G x Y): 7.5x3.81x4.4 cm
  • Ağırlık: 140 gram
  • Malzeme: Plastik
  • Özellikler: Backlight, Radio Wave Control
  • Güç Kaynağı: 1 x AA Pil (dahil)
  • Görüntüleme Türü: Analog
  • Stil: Modern

Garanti ve Destek

Garanti bilgileri veya teknik destek için lütfen satın alma sırasında verilen belgelere bakın veya satıcınızla iletişime geçin. Garanti talepleri için satın alma belgenizi saklayın.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.