Inventum MK350 Milk Frother

giriiş

Thank you for choosing the Inventum MK350 Milk Frother. This appliance is designed to quickly and efficiently froth milk for various beverages or heat milk to your desired temperature. Please read this manual carefully before using the appliance to ensure safe and optimal operation. Keep this manual for future reference.

Önemli Güvenlik Talimatları

• Kullanmadan önce tüm talimatları okuyunuz.
• Do not immerse the frother unit or power base in water or other liquids.
• Ses seviyesini garantileyintage cihaz üzerinde belirtilen yerel şebeke hacminize karşılık gelir.tage bağlanmadan önce.
• Bu cihaz yalnızca ev kullanımı içindir. Açık havada kullanmayın.
• Cihazı daima sağlam, düz ve ısıya dayanıklı bir yüzeye yerleştirin.
• Cihazı hasarlı bir kablo veya fişle veya cihaz arızalandıktan veya herhangi bir şekilde hasar gördükten sonra çalıştırmayın.
• Cihazı ve kablosunu çocukların erişemeyeceği yerde saklayın.
• Sıcak yüzeylere dokunmayın. Kulp veya düğmeleri kullanın.
• Kullanılmadığında ve temizlemeden önce fişini prizden çekin. Parçaları takıp çıkarmadan ve cihazı temizlemeden önce soğumasını bekleyin.
• Üretici tarafından tavsiye edilmeyen aparatları kullanmayınız.

Ürün Bittiview

Familiarize yourself with the components of your Inventum MK350 Milk Frother.

Şekil 1: This image displays the Inventum MK350 Milk Frother from the front, showcasing its stainless steel upper body, black base, handle, and the control panel with indicator lights and power button.

Şekil 2: Bir taraf view of the Inventum MK350 Milk Frother, emphasizing the ergonomic handle and the pouring spout integrated into the stainless steel jug.

Şekil 3: A view into the interior of the milk frother, highlighting the non-stick coating and the small central pin where the frothing whisk is attached.

Şekil 4: A close-up image of the small, detachable whisk with a spring coil, designed for creating milk foam. This whisk attaches to the central pin inside the frother.

Şekil 5: The separate power base for the milk frother, featuring a central connector for the frother unit and a power cord.

Bileşenler:

• Frother Jug: Stainless steel jug with non-stick interior.
• Halletmek: Ergonomic handle for safe pouring.
• Kapak: Transparent lid (not explicitly shown but implied for frother).
• Köpürtme Çırpıcısı: Detachable whisk with spring coil for frothing.
• Isıtma Çırpıcısı: (If applicable, otherwise use frothing whisk for heating too). The input suggests one whisk for frothing.
• Kontrol Paneli: Power button and indicator lights for different functions.
• Güç Tabanı: Cordless 360-degree rotating base with power cord.

Kurmak

1. Paketin açılması: Tüm ambalaj malzemelerini dikkatlice çıkarın. Ambalajı ileride saklama veya taşıma için muhafaza edin.
2. İlk Temizlik: Before first use, clean the frother jug and whisk according to the 'Maintenance and Cleaning' section. Wipe the exterior of the power base with a damp Kumaş.
3. Atama: Place the power base on a dry, stable, and level surface away from water sources and heat.
4. Çırpma Eki: Insert the frothing whisk onto the central pin inside the frother jug. Ensure it is securely seated.

Kullanım Talimatları

The Inventum MK350 offers options for hot frothing, cold frothing, and heating milk.

1. Prepare the Frother: Ensure the frothing whisk is correctly installed inside the jug.
2. Süt ekleyin: Pour cold milk into the frother jug. Observe the internal markings for maximum fill levels:
   • İçin köpürme (hot or cold): Do not exceed the 115 ml işaret.
   • İçin sadece ısıtma (without frothing): Do not exceed the 240 ml işaret.

   Note: Using full-fat milk typically yields the best frothing results.
3. Güç Temeline Yerleştirme: Position the frother jug onto the power base.
4. İşlev Seçin:
   • İçin hot frothing or ısıtma sütü: Press the power button once. The red indicator light will illuminate, and the frother will begin operation.
   • İçin soğuk köpürtme: Press and hold the power button for approximately 2 seconds. The blue indicator light will illuminate, and the frother will begin cold frothing.
5. İşlem: The frother will operate for approximately 90 seconds for frothing, or until the milk reaches the optimal temperature for heating, then automatically switch off. The indicator light will turn off.
6. Sert: Carefully remove the frother jug from the power base and pour the frothed or heated milk into your beverage.
7. Sakin ol: Allow the frother to cool down for a few minutes between uses to ensure optimal performance and prevent overheating.

Bakım ve Temizlik

Regular cleaning ensures the longevity and hygiene of your milk frother. Always unplug the appliance before cleaning.

1. Fişini Çek ve Soğut: Disconnect the power base from the mains outlet and allow the frother jug to cool down completely after use.
2. Çırpma telini çıkarın: Carefully remove the frothing whisk from the central pin inside the jug.
3. Clean Frother Jug: The frother jug is Sadece elde yıkama. Wash the interior of the jug with warm, soapy water and a soft sponge or cloth. The non-stick coating facilitates easy cleaning. Rinse thoroughly and dry immediately. Do not use abrasive cleaners or scouring pads, as these can damage the non-stick surface.
4. Temiz Çırpıcı: Wash the frothing whisk with warm, soapy water. Use a small brush if necessary to clean the spring coil. Rinse and dry thoroughly.
5. Dış Görünümü Temizleyin: Köpürtme kabının ve güç tabanının dış yüzeyini bir temizleyici ile silin.amp Bezle temas ettirmeyin. Güç tabanını suya batırmayın.
6. Depolamak: Once clean and dry, store the frother with the whisk inside the jug, or in a safe place.

Sorun giderme

If you encounter issues with your Inventum MK350 Milk Frother, refer to the following common problems and solutions:

• Frother does not start:
  • Ensure the power base is securely plugged into a working electrical outlet.
  • Verify the frother jug is correctly placed on the power base.
  • Güç düğmesine sıkıca basın.
• Milk is not frothing or frothing poorly:
  • Check that the frothing whisk is properly installed on the central pin.
  • Ensure the milk level does not exceed the maximum fill line for frothing (115 ml).
  • Use cold, fresh milk. Full-fat milk generally froths better than low-fat or skim milk.
  • Clean the whisk and the interior of the jug thoroughly, as residue can affect performance.
• Milk is not heating:
  • Ensure the milk level does not exceed the maximum fill line for heating (240 ml).
  • Confirm the correct function (hot frothing/heating) was selected.
  • Allow the appliance to cool down if it has been used multiple times in quick succession, as an overheating protection mechanism might be active.
• Indicator lights are not working:
  • Check power connection and ensure the frother is operating. If the frother is working but lights are off, contact customer support.

If the problem persists after attempting these solutions, please contact Inventum customer support or your retailer.

Özellikler

Garanti ve Destek

For information regarding the warranty period and conditions for your Inventum MK350 Milk Frother, please refer to the warranty card included with your purchase or consult the retailer from whom you purchased the product. For technical support, spare parts, or service inquiries, please contact Inventum customer service directly or visit their official webiletişim bilgileri için site.