ACI372693

ACI 372693 Windshield Washer Pump User Manual

Modeli: 372693

Ürün Bittiview

The ACI 372693 Windshield Washer Pump is engineered to match Original Equipment (OE) washer pumps, ensuring compatibility and reliable performance. It is designed to fit the original windshield washer pump location and features an OE style electrical connector for straightforward installation. This pump includes two nozzles for effective windshield cleaning.

ACI 372693 Windshield Washer Pump

Image: ACI 372693 Windshield Washer Pump. This image displays the complete pump unit, showing its main body, electrical connector, and the two integrated nozzles.

Temel Özellikler

  • Engineered to match Original Equipment washer pumps.
  • Designed for direct fit to original windshield washer pump systems.
  • Features an OE style electrical connector for secure attachment.
  • Equipped with two nozzles for efficient fluid delivery.

Kurulum (Setup)

Installation of the ACI 372693 Windshield Washer Pump typically involves replacing an existing pump. While specific steps may vary by vehicle model, the general procedure includes:

  1. Önce Güvenlik: Ensure the vehicle's ignition is off and the battery is disconnected before beginning any work.
  2. Locate the Washer Reservoir: The windshield washer pump is usually located at the bottom of the washer fluid reservoir. Access may require removing a wheel well liner or other components depending on the vehicle.
  3. Drenaj Sıvısı: Mümkünse, pompa sökülürken dökülmeyi en aza indirmek için yıkama sıvısını hazneden boşaltın.
  4. Elektrik Konnektörünü Çıkarın: Carefully disconnect the electrical connector from the old pump.
  5. Hortumları çıkarın: Disconnect the washer fluid hoses from the old pump. Be prepared for some fluid to leak.
  6. Eski Pompayı Çıkarın: The pump is typically held in place by a rubber grommet. Gently pull or twist the old pump out of the reservoir. Ensure the old grommet is removed and replaced with a new one if necessary (note: a new grommet may not be included with this product).
  7. Yeni Pompayı Takın: Insert the new ACI 372693 pump into the reservoir, ensuring a snug fit with the grommet.
  8. Hortumları ve Elektrik Bağlantılarını Yeniden Yapın: Reattach the washer fluid hoses and the electrical connector to the new pump.
  9. Refill Reservoir and Test: Refill the washer fluid reservoir and reconnect the battery. Test the washer system to ensure proper operation and check for leaks.

Note: Professional installation is recommended if you are unfamiliar with automotive repair procedures. Always refer to your vehicle's specific service manual for detailed instructions.

Kullanım Talimatları

The ACI 372693 Windshield Washer Pump operates as part of your vehicle's existing windshield washer system. Its function is to pump washer fluid from the reservoir to the windshield nozzles when activated.

  • Etkinleştirme: The pump is activated by the vehicle's windshield washer stalk or button, typically located on the steering column.
  • Fluid Delivery: Upon activation, the pump draws fluid from the reservoir and propels it through the hoses to the windshield nozzles, allowing for cleaning.
  • Wiper Operation: In most vehicles, activating the washer pump will also initiate a few cycles of the windshield wipers to clear the fluid and debris.

Ensure the washer fluid reservoir is adequately filled with appropriate windshield washer fluid, especially in freezing temperatures.

Bakım

The ACI 372693 Windshield Washer Pump is designed for durability and requires minimal maintenance. However, regular checks of the overall washer system are recommended:

  • Sıvı Seviyesi: Regularly check and refill the windshield washer fluid reservoir. Use high-quality washer fluid suitable for your climate.
  • Nozul Denetimi: Periodically check the windshield washer nozzles for clogs or misalignment. Clear any debris with a fine needle if necessary.
  • Hortumun Bütünlüğü: Inspect the washer fluid hoses for cracks, leaks, or kinks that could impede fluid flow.
  • Elektrik Bağlantıları: Ensure the electrical connector to the pump remains clean and securely attached.

Sorun giderme

SorunOlası NedenÇözüm
Washer pump does not operate.
  • Low or empty fluid reservoir.
  • Sigorta atmış.
  • Arızalı elektrik bağlantısı.
  • Arızalı pompa.
  • Depoyu doldurun.
  • Check and replace fuse (refer to vehicle manual).
  • Inspect and secure electrical connector.
  • Replace pump if other solutions fail.
Weak or no fluid spray.
  • Tıkalı nozullar.
  • Kinked or leaking hoses.
  • Düşük sıvı seviyesi.
  • Sistemde hava var.
  • Clear nozzles with a fine needle.
  • Inspect and repair/replace hoses.
  • Depoyu doldurun.
  • Run pump for a few seconds to clear air.
Fluid leaks around pump.
  • Damaged or improperly seated grommet.
  • Gevşek hortum bağlantısı.
  • Ensure pump is fully seated; replace grommet if damaged.
  • Tighten or re-secure hose connections.

Özellikler

MarkaACI
Model Numarası372693
Ürün Ağırlığı4 ons
Ürün Boyutları6.5 x 2.7 x 2.1 inç
Üretici Parça Numarası372693
Nozullar2
Elektrik BağlantısıOE Stili

Garanti ve Destek

For information regarding warranty coverage and technical support for your ACI 372693 Windshield Washer Pump, please refer to the official ACI product documentation or contact ACI customer service directly. Warranty terms typically cover manufacturing defects for a specified period from the date of purchase.

İletişim Bilgileri:

  • Visit the official ACI webDestek kaynakları için site.
  • Refer to your purchase receipt or packaging for specific warranty details.

© 2024 ACI. All rights reserved.

This manual is for informational purposes only. ACI is not responsible for any damage or injury resulting from improper installation or use of this product.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.