Breadman COMINHKR058410

Breadman TR520 Yatay Ekmek Makinesi Kullanım Kılavuzu

Model: TR520 / COMINHKR058410

Brand: Breadman

Önemli Güvenlik Önlemleri

Elektrikli aletleri kullanırken, aşağıdakiler de dahil olmak üzere temel güvenlik önlemlerine her zaman uyulmalıdır:

  • Ekmek yapma makinesini çalıştırmadan önce tüm talimatları okuyun.
  • Sıcak yüzeylere dokunmayın. Kulp veya düğmeleri kullanın.
  • Elektrik çarpmasına karşı korunmak için kabloyu, fişleri veya cihazı suya veya başka bir sıvıya daldırmayın.
  • Herhangi bir cihazın çocuklar tarafından veya çocukların yakınında kullanılması durumunda yakın gözetim gereklidir.
  • Kullanılmadığında ve temizlemeden önce fişini prizden çekin. Parçaları takıp çıkarmadan önce soğumasını bekleyin.
  • Kablo veya fişi hasarlı olan veya cihaz arızalandıktan veya herhangi bir şekilde hasar gördükten sonra hiçbir cihazı çalıştırmayın.
  • Cihaz üreticisi tarafından önerilmeyen aksesuar aparatlarının kullanımı yaralanmalara sebep olabilir.
  • Açık havada kullanmayınız.
  • Kablonun masa veya tezgah kenarından sarkmasına veya sıcak yüzeylere temas etmesine izin vermeyin.
  • Sıcak gazlı veya elektrikli ocakların üzerine veya yakınına, ya da ısıtılmış fırına koymayın.
  • Sıcak yağ veya diğer sıcak sıvılar içeren bir cihazı hareket ettirirken son derece dikkatli olunmalıdır.
  • Bağlantıyı kesmek için herhangi bir kontrolü "kapalı" konumuna getirin, ardından fişi prizden çıkarın.
  • Cihazı kullanım amacı dışında kullanmayınız.
  • Bu ürün, Kaliforniya Eyaleti tarafından kansere, doğum kusurlarına veya diğer üreme zararlarına neden olduğu bilinen kimyasallar içermektedir.

Ürün Bittiview

The Breadman TR520 is a horizontal loaf breadmaker designed to produce loaves up to 2 pounds. It features an intuitive control panel with 8 pre-programmed functions, a 13-hour delay timer, and crust control settings. The unit includes a removable bread pan and a kneading paddle for easy operation and cleaning.

Breadman TR520 Horizontal Loaf Breadmaker, angled view

Şekil 1: Açısal view of the Breadman TR520 Breadmaker, showcasing its white plastic exterior and top viewpencere.

Breadman TR520 Breadmaker control panel

Şekil 2: Üst view of the Breadman TR520, highlighting the yellow control panel with program selections, display, and operation buttons.

Breadman TR520 Breadmaker with removable bread pan and kneading paddle

Figure 3: The Breadman TR520 Breadmaker shown alongside its removable bread pan and kneading paddle, ready for assembly.

Bileşenler:

  • Ana Ünite: The primary housing for the baking chamber and control panel.
  • Ekmek Tavası: A removable, non-stick pan where ingredients are mixed and baked.
  • Yoğurma Küreği: Hamuru karıştırmak ve yoğurmak için ekmek kalıbının içindeki şafta takılır.
  • Measuring Cup/Spoon (not pictured, but typically included): Malzemelerin doğru ölçümü için.

İlk Kullanımdan Önce / Kurulum

  1. Paketi aç: Carefully remove the breadmaker and all accessories from the packaging. Retain packaging for future storage or transport.
  2. Temiz: Wash the bread pan and kneading paddle with warm, soapy water. Rinse thoroughly and dry completely. Wipe the exterior of the breadmaker with a damp bez. Ana üniteyi suya batırmayın.
  3. Atama: Place the breadmaker on a stable, flat, heat-resistant surface, away from direct sunlight and heat sources. Ensure adequate ventilation around the appliance.
  4. First Bake Cycle (Recommended): To eliminate any manufacturing odors, perform an empty bake cycle.
    • Insert the empty bread pan with the kneading paddle attached into the breadmaker.
    • Kapağı kapatın.
    • Plug in the breadmaker.
    • Select the "Bake Only" program (Program 8).
    • Press "Start/Stop". Allow the cycle to run for approximately 10-15 minutes, then press "Start/Stop" to cancel and unplug.
    • Allow the unit to cool completely before cleaning again.

Kullanım Talimatları

Malzemelerin Eklenmesi:

  1. Attach the kneading paddle to the shaft inside the bread pan. Ensure it is securely in place.
  2. Add ingredients to the bread pan in the order specified by your recipe. Typically, liquids are added first, followed by dry ingredients, with yeast added last on top of the dry ingredients, away from liquids and salt.
  3. Carefully place the filled bread pan into the breadmaker, pressing down firmly until it clicks into place.
  4. Kapağı sıkıca kapatın.

Kontrol Paneli Fonksiyonları:

  • Program: Press to cycle through the 8 available programs. The selected program number will display on the LCD screen.
  • SOMUN: Press to select the desired loaf size (e.g., 1.5 lb or 2 lb).
  • CRUST COLOR: Press to choose light, medium, or dark crust.
  • ZAMANLAYICI (+/-): Use these buttons to set the delay timer for delayed baking. Each press adjusts the time in 10-minute increments.
  • BAŞLA DUR: Press once to start the selected program. Press and hold for a few seconds to stop or cancel a program.

Bir Program Başlatmak:

  1. Ekmek yapma makinesini topraklı bir elektrik prizine takın.
  2. Select the desired program using the "PROGRAM" button.
  3. Select the loaf size using the "LOAF" button.
  4. Select the crust color using the "CRUST COLOR" button.
  5. If immediate baking is desired, press the "START/STOP" button. The breadmaker will begin its cycle.
  6. If using the delay timer, set the desired delay time using the "TIMER (+/-)" buttons, then press "START/STOP". The timer will count down before the program begins.

Ekmeği Çıkarma:

  1. Once the baking cycle is complete, the breadmaker will beep and may enter a 1-hour keep-warm cycle.
  2. Unplug the breadmaker.
  3. Using oven mitts, carefully remove the bread pan from the breadmaker. The pan and surrounding areas will be hot.
  4. Invert the bread pan onto a wire rack and shake gently until the bread loaf slides out. If the kneading paddle remains in the loaf, carefully remove it with a non-metallic utensil after the bread has cooled slightly.
  5. Allow the bread to cool on a wire rack for at least 15-30 minutes before slicing to ensure proper texture.

Program Rehberi

The Breadman TR520 offers 8 pre-programmed cycles to simplify various bread and dough preparations:

program numarasıProgram AdıTanım
1TEMELBeyaz ve karışık ekmekler için, esas olarak temel ekmek unu kullanılarak yapılır.
2FRANSIZCAİnce undan yapılan, genellikle daha gevrek kabuklu hafif ekmekler için.
3TAM BUĞDAYFor breads containing a significant proportion of whole wheat flour.
4TATLIFor breads with high sugar, fats, and proteins, such as brioche or sweet rolls.
5HAMURPrepares dough for rolls, pizza, or other baked goods that will be shaped and baked in a conventional oven. No baking cycle.
6RAPIDA quicker cycle for basic breads, often resulting in a denser loaf.
7ULTRA HIZLIAn even faster cycle for basic breads, suitable for quick results.
8SADECE FIRINDA YAPINFor baking pre-prepared dough or for adding additional baking time to a loaf. No kneading or rising.

Note: Specific timings for each program may vary. Refer to your recipe book for detailed instructions and ingredient quantities for each program.

Bakım ve Temizlik

Proper cleaning and maintenance will extend the life of your breadmaker.

  • Always unplug the breadmaker and allow it to cool completely before cleaning.
  • Ekmek Tavası ve Yoğurma Küreği: These parts are Sadece elde yıkama. Wash with warm, soapy water. Do not use abrasive cleaners or scouring pads, as this can damage the non-stick coating. Rinse thoroughly and dry completely before storing or reassembling. If the kneading paddle is stuck, fill the pan with warm water and let it soak for 10-15 minutes to loosen it.
  • Dış: Wipe the exterior of the breadmaker with a soft, damp cloth. Do not use harsh chemicals or abrasive cleaners. Never immerse the main unit in water or other liquids.
  • İç mekan: Yumuşak bir d kullanınamp Pişirme haznesinin içini bir bezle silin. Kırıntıları veya kalıntıları temizleyin.
  • Depolamak: Ensure all parts are clean and dry before storing the breadmaker. Store in a cool, dry place.

Sorun giderme

If you encounter issues with your Breadman TR520, consult the following common problems and solutions:

SorunOlası NedenÇözüm
Ekmek hiç kabarmıyor veya çok fazla kabarıyor.Incorrect yeast quantity, old yeast, water temperature too hot/cold, incorrect flour type, too much salt/sugar.Ensure yeast is fresh and active. Use lukewarm water (105-115°F / 40-46°C). Measure ingredients precisely. Check recipe for correct flour and ingredient ratios.
Ekmek yoğun veya ağırdır.Too much flour, not enough liquid, incorrect program selected, old yeast.Accurately measure flour (spoon into cup, level off). Ensure correct liquid amount. Select appropriate program for the bread type.
Ekmeğin içine sıkışmış yoğurma küreği.Sık rastlanan bir durum.Allow bread to cool slightly. Use a non-metallic utensil (e.g., plastic spatula) to carefully pry out the paddle. Avoid metal utensils to prevent scratching the non-stick coating.
Machine does not start or respond.Fişe takılı değil, güç çıkışıtage, lid not closed properly, program not selected.Check power connection. Ensure lid is fully closed. Select a program and press "START/STOP". If still unresponsive, unplug for 5 minutes and try again.
Control panel labels are difficult to read.Low contrast between text and background color.Use the manual as a reference for button functions. Consider using a small task light for better visibility when operating the machine.

Bu çözümleri denedikten sonra sorun devam ederse, lütfen destek bölümüne bakın veya müşteri hizmetleriyle iletişime geçin.

Özellikler

ÖzellikDetay
Model NumarasıTR520 / COMINHKR058410
MarkaEkmek adam
Ekmek Kapasitesi2 lbs'ye kadar
Programlar8 (Basic, French, Whole Wheat, Sweet, Dough, Rapid, Ultra Fast, Bake Only)
Alarmı ertele13-hour programmable delay
Kabuk KontrolüAçık, Orta, Koyu
Sıcak Tutma Fonksiyonu1-hour automatic keep-warm
Güç560 Watt
RenkBeyaz
Ürün AğırlığıYaklaşık 11.15 lbs
Ürün BakımıHand Wash Only (Bread Pan & Paddle)
ÜreticiUygulama

Garanti ve Destek

For detailed warranty information, please refer to the warranty card included with your product or visit the official Breadman webSite. Garanti şartları genellikle satın alma tarihinden itibaren belirli bir süre boyunca üretim hatalarını kapsar.

If you require technical assistance, have questions about operation, or need to inquire about replacement parts, please contact Breadman customer support. Contact details can usually be found on the manufacturer's webSitede veya ürün ambalajında.

When contacting support, please have your model number (TR520 / COMINHKR058410) and date of purchase readily available.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.