giriiş
The JJC TM-C Multifunction Timer Remote Control is designed to provide advanced shutter release capabilities for compatible DSLR and SLR cameras. This device allows for simple shutter release, as well as complex timed functions such as self-timer, interval timer, long exposure timer, and exposure count settings. It connects to your camera via a wired connection, offering reliable control for various photographic scenarios.
This manual will guide you through the setup, operation, and maintenance of your TM-C remote control.
Temel Özellikler
- Easy to program for various shooting modes.
- İki-stage release button for focus and shutter.
- Self-timer function with delays from 0 seconds to 99 hours, 59 minutes, 59 seconds.
- Interval shooting for time-lapse photography.
- Precise long exposure time control.
- Exposure count setting up to 399 or unlimited.
Paket İçeriği
- JJC TM-C Multifunction Timer Remote Control
- Connection Cable (90 cm long)
- Kullanıcı Kılavuzu
Kurmak
1. Pil Kurulumu
- Uzaktan kumandanın arkasındaki pil bölmesini bulun.
- Pil bölmesinin kapağını açın.
- İki adet AAA alkalin pili, doğru kutuplara (+/-) dikkat ederek takın.
- Pil bölmesi kapağını sıkıca kapatın.
2. Connecting to Your Camera
- Kameranızın kapalı olduğundan emin olun.
- Locate the remote control terminal on your camera. This is typically a 2.5mm jack.
- Connect the 2.5mm plug of the TM-C remote control cable into your camera's remote control terminal.
- Kameranızı açın.
Not: Some cameras may require a specific setting in their menu to enable the remote control port. Refer to your camera's instruction manual if the remote does not respond after connection.
The image shows the JJC TM-C remote control unit. It features a large LCD screen for settings, several control buttons, and a coiled cable for connecting to a camera.
Kullanım Talimatları
The TM-C remote control features an LCD display and several buttons for navigation and setting adjustments. The main control button typically functions as a two-stage shutter release: a half-press for autofocus and a full-press for shutter activation.
Temel Deklanşör Tetikleme
- Press the main shutter button halfway to focus.
- Press the main shutter button fully to take a picture.
Zamanlayıcı Fonksiyonları
The TM-C allows you to program various timed shooting sequences. Use the directional buttons and SET button to navigate the menu and adjust values on the LCD screen.
- Delay Timer (DELAY): Sets a delay before the first exposure. Adjustable from 0 seconds to 99 hours, 59 minutes, 59 seconds.
- Uzun Pozlama Zamanlayıcısı (UZUN): Controls the duration of the shutter being open. This is used for bulb mode photography. Adjustable from 0 seconds to 99 hours, 59 minutes, 59 seconds.
Note: For long exposures, your camera must be set to Bulb mode. If your camera does not have a Bulb mode, the longest exposure will be limited by your camera's maximum shutter speed. - Aralık Zamanlayıcısı (INTVL): Sets the time between consecutive exposures. Adjustable from 1 second to 99 hours, 59 minutes, 59 seconds.
- Number of Exposures (N): Sets the total number of photos to be taken in a sequence. Adjustable from 1 to 399, or set to unlimited.
Consult the on-screen menu and the detailed instructions provided in the included manual for specific programming steps for each function.
Bakım
- Keep the remote control clean and dry. Use a soft, dry cloth to wipe the surface.
- Cihazı aşırı sıcaklıklara, neme veya doğrudan güneş ışığına maruz bırakmaktan kaçının.
- Uzaktan kumanda uzun süre kullanılmayacaksa, pil sızıntısını önlemek için pilleri çıkarın.
- Handle the connection cable with care to prevent damage to the wires or connectors.
Sorun giderme
| Sorun | Olası Neden | Çözüm |
|---|---|---|
| Uzaktan kumanda açılmıyor. | Piller bitmiş veya yanlış takılmış. | Pilleri yeni AAA alkalin pillerle değiştirin. Kutup yönünü kontrol edin. |
| Camera does not respond to remote. | Incorrect camera settings; cable not fully connected; incompatible camera model. | Ensure camera is on and set to remote control mode (if applicable). Firmly connect the 2.5mm cable. Verify camera compatibility. |
| Issue with long bulb exposures (e.g., >1 minute) and interval shooting. | Potential firmware or operational limitation. | Ensure camera is in Bulb mode. Test with shorter exposures first. If issues persist, contact JJC support. |
| LCD ekran soluk veya boş. | Pil gücü düşük. | Pilleri değiştirin. |
Özellikler
- Modeli: TM-C
- Marka: JJC
- Renk: Siyah
- Bağlantı: Kablolu (2.5 mm jak)
- Kablo Uzunluğu: Yaklaşık 90 cm
- Güç Kaynağı: 2 x AAA Alkalin Piller
- Düğme Sayısı: 7
- Zamanlayıcı Aralığı 0sn ila 99s 59dk 59sn
- Exposure Count: 1 to 399, or unlimited
- Uyumlu Cihazlar: Cameras (Canon, Contax, Pentax, Samsung models listed below)
Uyumlu Kamera Modelleri:
- Kanon: EOS 60D, 60Da, 70D, 300D, 350D, 400D, 450D, 500D, 550D, 600D, 650D, 700D, 1000D, 1100D; Powershot G10, G11, G12, G1X, G16.
- Pentax: K3, K100D, K110D, K10D, *ist DS2, K200D, K20D, K7, *ist D, *ist Ds, *ist, *ist DL, MZ-6, ZX-L, MZ-L, *ist DL2, K5, K30.
- Samsung: GX-1L, GX-1S, GX-10, GX-20, NX10, NX100, NX5.
- İletişim: 645, N, N1, NX, N Digital.
Garanti ve Destek
JJC products typically come with a limited warranty. Please refer to the warranty card included with your product or visit the official JJC website for detailed warranty terms and conditions. For technical support, troubleshooting assistance, or inquiries about replacement parts, please contact JJC customer service through their official channels.