WAC Lighting TK-103LED Line Voltage Track Head Instruction Manual

1. Giriş

This manual provides detailed instructions for the safe installation, operation, and maintenance of your WAC Lighting TK-103LED Line Voltage Track Head with 8W GU10 LED Bulb. Please read all instructions carefully before installation and retain this manual for future reference. This product is designed for indoor use only.

2. Güvenlik Bilgileri

UYARI: Yangın, elektrik çarpması veya kişisel yaralanma riskini azaltmak için lütfen aşağıdakilere dikkat edin:

• Kurulum veya bakım işlemlerinden önce devre kesiciden elektriğin kapatıldığından emin olun.
• Tüm elektrik bağlantıları yerel yönetmeliklere, yönetmeliklere veya Ulusal Elektrik Koduna (NEC) uygun olmalıdır. Elektrik tesisatı bağlantıları konusunda bilgi sahibi değilseniz, yetkili bir elektrikçiye danışın.
• Bu aydınlatma armatürünü ıslak veya kuru yerlere monte etmeyin.amp locations. This product is rated for dry locations only.
• Aydınlatma armatüründe herhangi bir değişiklik veya modifikasyon yapmaya çalışmayın. Yapılacak her türlü değişiklik garantiyi geçersiz kılabilir ve güvenlik tehlikesi oluşturabilir.
• Öneri 65 Uyarısı: Bu ürün, Kaliforniya Eyaleti tarafından kansere ve doğum kusurlarına veya üremeyle ilgili diğer zararlara neden olduğu bilinen kimyasallar içerebilir.

3. Ürün Bittiview

The WAC Lighting TK-103LED is a line voltage track head designed for use with 120V track systems. It features a durable formed metal construction with a polycarbonate track adaptor and includes an 8W GU10 LED bulb. The fixture offers versatile aiming with 350-degree horizontal rotation and 90-degree vertical tilt, allowing for precise light direction.

Şekil 1: Ürün Boyutları
This diagram illustrates the dimensions of the WAC Lighting TK-103LED track head. The fixture measures approximately 4 11/16 inches in height when pointed downwards, and 5 7/16 inches when angled. The base width is 3 1/16 inches. The track adapter section is 1 3/8 inches wide and 1 1/8 inches high. The light head itself is 2 5/8 inches deep.

4. Kurulum ve Yükleme

This track head is designed for ceiling mount installation on 120V track systems. It is compatible with H, J/J2, and L track configurations. Ensure you have the correct track type for your installation.

4.1 Dahil Edilen Bileşenler

• Track fixture (with pre-installed 8W GU10 LED bulb)
• Kurulum talimatları

4.2 Kurulum Adımları

1. Gücü Kapatın: Before beginning installation, ensure the power to the track system is completely OFF at the circuit breaker.
2. Identify Track Type: Verify your track system is a 120V H, J/J2, or L type track. The track head adaptor is designed to fit these specific types.
3. Insert Track Head: Align the track head adaptor with the track slot. Push the adaptor firmly into the track and twist it to lock it into place. Ensure the electrical contacts on the adaptor engage properly with the track conductors.
4. Güvenli Fikstür: Tighten any aiming screws or locking mechanisms on the track adaptor to secure the fixture's position on the track.
5. Gücü Geri Yükle: Tesisat güvenli bir şekilde monte edildikten sonra devre kesicideki gücü geri yükleyin.

5. Operasyon

5.1 Aiming the Light

The TK-103LED track head allows for flexible light direction. You can rotate the fixture 350 degrees horizontally and tilt it 90 degrees vertically to illuminate your desired area. Loosen the aiming screws slightly, adjust the fixture, and then re-tighten the screws to secure its position.

5.2 Karartma

This fixture is designed for smooth and continuous dimming from 100% down to 1% when used with an electronic low voltage (ELV) dimmer. For optimal performance and to avoid flickering, ensure your dimmer switch is compatible with LED lighting and specifically with ELV dimming protocols.

6. Bakım

6.1 Temizlik

To clean the fixture, ensure power is off. Wipe with a soft, dry cloth. Do not use abrasive cleaners or solvents, as these may damage the finish or electrical components.

6.2 Re-Lamping (Bulb Replacement)

The TK-103LED track head uses a GU10 LED bulb. While the included LED bulb has a long lifespan, it can be replaced if necessary. The fixture is designed for easy re-lamping from the front without the use of tools. To replace the bulb:

1. Elektrik şalterinden armatürün elektriğini kesin.
2. Carefully grasp the decorative glass shade or the bulb itself and twist counter-clockwise to remove the GU10 bulb.
3. Insert a new GU10 LED bulb by aligning the pins with the socket holes and twisting clockwise until secure.
4. Fikstürün gücünü geri yükleyin.

7. Sorun Giderme

8. Özellikler

• Marka: WAC Aydınlatma
• Model Numarası: LTK-103LED-BK
• Renk: Siyah
• Malzeme: Aluminum (fixture), Glass (shade)
• Stil: L Track (compatible with H, J/J2 track types)
• Belirli Kullanımlar: Sadece iç mekanda kullanılabilir
• Güç Kaynağı: AC
• Işık kaynağı: NEDEN OLMUŞ
• Işık Kaynağı Sayısı: 1
• Cilttage: 120 Volt
• Netage: 8 watt
• Ampul Tabanı: GU10
• Anahtar Türü: Dimmer compatible (ELV LED)
• Parlaklık: 470 Lümen
• Montaj Tipi: Tavan Montajı
• Öğe Boyutları (U x G x Y): 2.63" x 3.63" x 5.44" (Note: Height varies with aiming, refer to Figure 1 for detailed dimensions)
• Ürün Ağırlığı: 4.32 ons
• UPC: 790576225050

9. Garanti ve Destek

9.1 Üretici Garantisi

WAC Lighting provides a warranty for this product: 5 years for functional components and 2 years for the finish. Please retain your proof of purchase for warranty claims.

9.2 Müşteri Desteği

For technical assistance, replacement parts, or warranty inquiries, please contact WAC Lighting customer support. Refer to the WAC Lighting webGüncel iletişim bilgileri için site veya ürün ambalajına bakın.