Candy 92130871 Washing Machine Replacement Belt Instruction Manual

1. Giriş

This instruction manual provides essential information for the proper installation, maintenance, and troubleshooting of the Candy 92130871 washing machine replacement belt. Please read this manual thoroughly before attempting any installation or repair to ensure safe and effective operation.

2. Güvenlik Bilgileri

• Çamaşır makinesini daima elektrik prizinden ayırın. before attempting any installation, maintenance, or repair work. Failure to do so can result in electric shock or serious injury.
• Yaralanmayı önlemek için eldiven gibi uygun kişisel koruyucu ekipman giyin.
• Herhangi bir adımda emin değilseniz, kalifiye bir teknisyene danışın.
• Onarım sırasında çocukları ve evcil hayvanları cihazdan uzak tutun.
• Tüm aletlerin iyi durumda olduğundan ve doğru kullanıldığından emin olun.

3. Ürün Bittiview

The Candy 92130871 is an authentic replacement drive belt designed for various Candy washing machine models. This belt is crucial for transmitting power from the motor to the drum, enabling the washing machine to operate correctly.

Image 1: The Candy 92130871 washing machine replacement belt. This image shows the black rubber belt, typically ribbed on one side for grip.

4. Uyumluluk

This replacement belt (Manufacturer Code: 92130871) is compatible with a wide range of Candy washing machine models. Please verify your washing machine's model number against the list below to ensure proper fitment.

Uyumlu modeller şunlardır:

• CANDY AC16, ACTIVA50, ACTIVA51, ACTIVA60, ACTIVA61, ACTIVA64SLIM, ACTIVA66SL, ACTIVA6CI
• ALISE060, ALISE065, ALISE066, ALISE'160XT, ALISE190X, ALISE6190X0, ALISE'.610B, ALISE'65 ARG, ALISE'650, ALISE'696
• AQUAV.6, AQUAVIVA60, AQUAVIVA63, AQUAVIVA650, AQUAVIVA66
• C36ZXT, C532, C535T, C536T, C55XT (I), C564XT plata, C577T, C588XT, C58XT (I), C6077T, XT AQUAM, CM.608XT (I)
• C616XT (I), C625XT, C634XT, C634XT (CE), C634XT (NORD), C636XT, C647XT (I), C657XT (I)
• CB52T, CB52TCKD, CB53XTR, CB612XT, CB613TR, CB623XTTR HC, CB62T, CB62TR, CB633XTR, CB634XT, CB63TES, CB63TR, CB63TRCKD, CB63XTR
• CE520T, CE530, CE615, CE621T, CE623R, CE625TR, CE629T, CE637XT, CE650TR
• CG5444T, CG5544T, CG623T, CG644.3T, CG644T, CG654XT, CGAQ665XT
• CH630, CHIARA51XT, CHIARA540XTR, CHIARA552TR, CHIARA55XTR, CHIARA5XT, CHIARA5XTV, CHIARA642XTR, CHIARA65XTR, CHIARA65XT, CHIARA65XTV, CHIARA65XTR, CHIARA65X2XTR, CHIARA6XT
• CI50XTR, CI537T, CI57TR, CI589XT, CI60XTR, CI60XTR H/C, CI620TP, CI622T, CI624T, CI626XT, CI627T, CI637T, CI648XT, CI658XT
• CJ6514, CJ543T, CJ613XT, CJ643T, CJA52T
• CL66XT, CN50T, CN50T-04S, CN60T, CN63T, CN63T CI, CN63TCKD, CN63TRU-03S
• IPC 610, CR61, CS47XT (I), CSB640XTR, CSE640XTR, CSE615XT, CM.SE635XT, CSG624T, CSI615T, CSI635XTR, CSI635XTRSY, CSN62T, CSN62T-03S
• EXCL.S641XTR, EXCLUS.60, EXCLUS.6000, EXCLUS540XTR, EXCLUS65XTR
• HOL165XTR, HOL62, VACANZAS 6, HOLIDAY161, HOLIDAY60, HOLIDAY603, HOLIDAY61
• ICL60T, LADYC.623CKD, SEL.S643XTR, SELEC 0.631 XTR, SELECTA600, SELECTA60X, SELECTA61XXTR
• SL5000EXC, SL50EXCLUS., SLIM644AQUAV, SLIMMY508XT, SLIMMY634XT, SLIMMY655XT, SLIMMY6AQUAV, SLIMMYCB62XT, WM601.

5. Kurulum (Setup)

Replacing a washing machine drive belt requires careful attention. Follow these general steps. Specific machine designs may vary, so refer to your washing machine's primary service manual if available.

1. Hazırlık:
   • Disconnect the washing machine from the main power supply.
   • Makineye giden su kaynağını kapatın.
   • Pull the washing machine away from the wall to access the rear panel.
2. Kemer'e Erişim:
   • Locate and remove the screws securing the rear access panel of the washing machine.
   • Carefully remove the panel to expose the motor, drum pulley, and the old belt (if still present).
3. Eski Kayışı Çıkarın:
   • If the old belt is still partially attached, carefully pry it off the motor pulley and then the larger drum pulley. Note its orientation.
4. Yeni Kayışı Takın:
   • First, loop the new Candy 92130871 belt around the smaller motor pulley.
   • Next, partially loop the belt around the larger drum pulley.
   • While holding the belt firmly on the motor pulley and partially on the drum pulley, slowly rotate the drum pulley by hand. The belt should gradually roll onto the drum pulley until it is fully seated. Ensure the ribbed side of the belt (if applicable) faces the pulleys correctly.
   • Check that the belt is centered on both pulleys and has proper tension. It should be snug but allow for a small amount of flex.
5. Yeniden birleştirme:
   • Replace the rear access panel and secure it with the screws.
   • Push the washing machine back into its position.
   • Reconnect the power supply and water supply.
6. Test:
   • Run a short, empty wash cycle to ensure the belt operates smoothly and quietly.

6. Bakım

Regular inspection of the drive belt can help prevent future issues and extend the life of your washing machine.

• Periyodik muayene: Every 1-2 years, or if you notice unusual noises or performance issues, inspect the belt for signs of wear, cracking, fraying, or stretching.
• Uygun Gerilim: Ensure the belt maintains proper tension. A loose belt can slip, causing the drum to not spin or spin intermittently. An overly tight belt can put undue stress on the motor and drum bearings.
• Temizlik: Keep the area around the motor and pulleys free from lint, debris, and moisture, which can affect belt performance and lifespan.

7. Sorun Giderme

Sorun giderme adımları sorunu çözmezse, kalifiye bir cihaz teknisyenine başvurmanız önerilir.

8. Özellikler

• Marka: Şeker
• Model Numarası: 92130871
• Ürün Türü: Washing Machine Replacement Belt
• Uyumlu Cihazlar: Çamaşır makinesi
• Paket Boyutları: 30 x 20 x 3 cm (yaklaşık)
• Ürün Ağırlığı: 100 gr (yaklaşık)

9. Garanti ve Destek

For information regarding warranty coverage, technical support, or to purchase additional parts, please refer to the official Candy webSite üzerinden veya müşteri hizmetleri departmanıyla iletişime geçin. Satın alma belgenizi saklayın.

Official Candy Webalan: www.candy-group.com