1. Ürün Bittiview
The ASUS TUF SABERTOOTH 990FX R2.0 is an ATX motherboard designed for AMD Socket AM3+ processors, supporting up to 8-core AMD FX Series CPUs and compatible with previous generation AM3 processors. This motherboard emphasizes stability, compatibility, and durability, ensuring reliable operation under various conditions.
Key features include CeraM!X premium ceramic-coating technology for enhanced heat dissipation, TUF Thermal Radar with 10 hardware sensors for real-time thermal detection, and DIGI+ Power Control for precise CPU and DRAM voltage regulation. It also incorporates ASUS E.S.P. for efficient power switching, MemOK! for memory boot compatibility, and ESD Guards for component protection. The board supports Quad-GPU SLI and Quad-GPU CrossFireX for multi-GPU configurations and utilizes military-standard TUF capacitors, chokes, and MOSFETs for extended lifespan.
2. Kurulum ve Kurulum
2.1. CPU Installation (Socket AM3+)
Carefully align your AMD AM3+ processor with the motherboard socket. Ensure the CPU is correctly oriented before gently lowering it into place. Close the retention lever to secure the CPU.
2.2. RAM Kurulumu (DDR3)
This motherboard supports DDR3 memory. Open the clips on the DIMM slots. Align the memory module's notch with the slot's key and press down firmly on both ends until the clips snap into place. Refer to the motherboard layout for recommended dual-channel configurations.
2.3. Storage Device Installation (SATA 6Gb/s)
Connect your SATA 6Gb/s storage devices (HDDs, SSDs) to the available SATA ports on the motherboard using SATA data cables. Ensure power cables from your power supply are also connected to the devices.
2.4. Genişletme Kartı Kurulumu (PCIe)
Insert your PCI Express expansion cards (e.g., graphics cards, sound cards) into the appropriate PCIe slots. Press down firmly until the card is seated correctly and secure it with a screw to the chassis.
2.5. Güç Bağlantıları
Güç kaynağınızdan gelen 24 pinli ATX ana güç konektörünü ve 8 pinli ATX 12V güç konektörünü anakart üzerindeki ilgili soketlere bağlayın.
2.6. Ön Panel Bağlantıları
Connect the front panel headers (power button, reset button, HDD LED, power LED, USB ports, audio jacks) from your chassis to the corresponding pins on the motherboard. Refer to the motherboard manual for exact pin assignments.
3. Kullanım Talimatları
3.1. BIOS/UEFI Yapılandırması
Upon initial boot, press the designated key (usually DEL or F2) to enter the BIOS/UEFI setup utility. Here you can configure boot order, system time, and various hardware settings. The DIGI+ Power Control allows for advanced power management and tuning.
3.2. Sürücü Kurulumu
After installing your operating system, install all necessary drivers from the provided support DVD or the ASUS website. This includes chipset drivers, audio drivers, LAN drivers, and any other peripheral drivers to ensure optimal system performance.
3.3. Sistem İzleme
Utilize the TUF Thermal Radar software to monitor real-time thermal conditions across 10 hardware sensors on the motherboard. This allows for customized cooling settings and proactive thermal management.
4. Bakım
4.1. Toz Temizliği
Regularly clean dust from the motherboard and cooling components using compressed air. Ensure the system is powered off and unplugged before cleaning.
4.2. BIOS Güncellemeleri
ASUS desteğini periyodik olarak kontrol edin website for BIOS/UEFI updates. Updating the BIOS can improve system stability, compatibility, and performance. Follow the instructions provided by ASUS carefully during the update process.
4.3. Bileşen Kontrolleri
Ensure all cables and components are securely seated. Loose connections can lead to system instability or non-functionality.
5. Sorun Giderme
5.1. Sistem Başlatılmıyor
- Verify all power connections to the motherboard and components are secure.
- Check that the CPU and RAM are correctly installed.
- Kullanın MemOK! button on the motherboard to resolve memory compatibility issues if the system fails to boot due to RAM.
- Ensure the graphics card is properly seated and connected to power, if applicable.
5.2. Peripheral Recognition Issues
- Tüm sürücülerin doğru şekilde yüklendiğinden ve güncel olduğundan emin olun.
- Check USB and SATA connections for proper seating.
- Test peripherals on different ports to rule out faulty ports.
5.3. Sistem Kararsızlığı/Çökmeleri
- Monitor system temperatures using TUF Thermal Radar to check for overheating.
- Ensure adequate cooling and airflow within the PC case.
- Verify RAM stability using diagnostic tools.
- Check for the latest BIOS/UEFI firmware and update if necessary.
The motherboard features ESD Guards to protect components from electrostatic discharge, which can help prevent certain types of hardware failures.
6. Özellikler
| Özellik | Detay |
|---|---|
| Marka | ASUS |
| Seri | SABERTOOTH 990FX R2.0 |
| Model Numarası | SABERTOOTH 990FX R2.0 |
| CPU Soketi | Soket AM3+ |
| Uyumlu İşlemciler | AMD FX Series (up to 8-core), AMD Athlon, AMD Sempron |
| Yonga Seti Türü | AMD 990FX |
| RAM Bellek Teknolojisi | DDR3 SDRAM |
| Desteklenen Maksimum RAM | 32 GB DDR3 |
| Bellek Hızı | 2666 MHz'e kadar |
| SATA Bağlantı Noktaları | SATA 6Gb/s |
| USB 2.0 Bağlantı Noktaları | 2 (rear panel) + internal headers |
| USB 3.0 Bağlantı Noktaları | 2 (rear panel) + internal headers |
| Ürün Boyutları (UxGxY) | 10.47 x 2.99 x 13.03 inç |
| Ürün Ağırlığı | 4.45 pound |
7. Ürün Görselleri
7.1. Ürün Görselleri
7.2. Resmi Ürün Videoları
Bu video genel bir bakış sağlarview of the product, highlighting its design and features. It is an official product video from the seller.
8. Garanti ve Destek
Ayrıntılı garanti bilgileri için lütfen resmi ASUS web sitesine bakın. website or the documentation included with your purchase. Product support, including driver downloads and further troubleshooting guides, can also be found on the official ASUS support portal.
Please note the legal disclaimer: "Item is nonrefundable once purchased. Still has original packaging." This information is provided by the seller and may pertain to specific purchase conditions.