RAB Lighting FFLED39 Future Flood LED Light User Manual

1. Ürün Bittiview

The RAB Lighting FFLED39 Future Flood LED Light is a high-performance, energy-efficient outdoor floodlight designed for various applications. This hardwired fixture features a durable bronze finish and provides cool white illumination.

Figure 1: RAB Lighting FFLED39 Future Flood LED Light

Temel Özellikler:

• Güç: 39-watt LED
• Renk Sıcaklığı: 5100K Soğuk Beyaz
• Ömür: 100,000 hours based on LM-80 tests
• LED'ler: Three multi-chip 13-watt high-performance LEDs
• Optik: NEMA type 7H x 6V with Air-flow technology heatsink
• Reflektör: Semi-specular anodized aluminum
• Contalar: yüksek sıcaklık silikon
• Sona ermek: Bronze chip and fade-resistant polyester powder coat
• Cilttage: 120-volt to 277-volt operation

2. Güvenlik Bilgileri

Read all instructions carefully before installation and operation. Failure to follow these instructions may result in electric shock, fire, or other hazards. Keep this manual for future reference.

• Elektriksel Güvenlik: Kurulum, tüm ulusal ve yerel elektrik yönetmeliklerine uygun olarak yetkili bir elektrikçi tarafından yapılmalıdır. Kurulum veya bakım işleminden önce devre kesiciden elektriğin kesildiğinden emin olun.
• Topraklama: The fixture must be properly grounded to prevent potential electric shock.
• Montaj: Ensure the mounting surface is structurally sound and capable of supporting the fixture's weight (approximately 10.23 lbs).
• Çalışma Sıcaklığı: Do not operate the fixture outside its specified temperature range.
• LED'ler: Do not stare directly into the LED light source when the fixture is operating, as this may cause eye damage.

3. Kurulum

This floodlight is designed for wall mounting and requires hardwired installation. Professional installation is recommended.

Gerekli Araçlar:

• Tornavida (Phillips ve düz uçlu)
• Tel striptizci
• Pense
• Drill (if mounting surface requires pilot holes)
• Ayarlanabilir anahtar

Montaj Seçenekleri:

The FFLED39 supports various mounting options. The standard fixture comes with a wall mount. Optional accessories may include slipfitter mounts or other specialized brackets.

Şekil 2: Ör.ample of a Slipfitter Mount (optional accessory)

Kurulum Adımları:

1. Gücü Kesin: Turn off power at the circuit breaker before beginning installation. Verify power is off using a voltage test cihazı.
2. Montaj Yüzeyini Hazırlayın: Securely attach the mounting bracket to the desired wall location. Ensure the bracket is level and firmly fastened.
3. Kablo Bağlantıları:
   • Connect the black wire from the fixture to the hot (L) wire from the power supply.
   • Connect the white wire from the fixture to the neutral (N) wire from the power supply.
   • Connect the green or bare copper wire from the fixture to the ground wire from the power supply.
   • Use appropriate wire connectors and ensure all connections are secure.
4. Montaj Fikstürü: Attach the FFLED39 fixture to the mounting bracket. Secure it with the provided screws or bolts.
5. Hedefi Ayarla: Loosen the adjustment screws on the fixture to aim the light as desired. Tighten the screws firmly once the desired angle is achieved.
6. Gücü Geri Yükle: Turn on power at the circuit breaker. Test the fixture for proper operation.

4. Operasyon

The RAB Lighting FFLED39 is a hardwired floodlight. Its operation is typically controlled by an external switch or a photocell (if installed).

Standart Çalışma:

• Once installed and wired, the fixture will illuminate when power is supplied via the connected wall switch or control system.
• Ensure the power source is within the specified 120-277V range.

Photocell Control (Optional):

If a photocell is integrated or installed with the fixture, the light will automatically turn on at dusk and off at dawn, based on ambient light levels.

Şekil 3: Ör.ample of a Photocell (optional accessory)

5. Bakım

The FFLED39 LED floodlight is designed for minimal maintenance due to its long-life LED components and durable construction.

Temizlik:

• Dış: Armatürün dış yüzeyini periyodik olarak yumuşak bir bezle temizleyin.amp cloth to remove dirt, dust, and debris. Do not use abrasive cleaners or solvents.
• Mercek: Gently wipe the lens with a clean, soft cloth to ensure maximum light output.

Denetleme:

• Periodically inspect the fixture for any signs of damage, loose connections, or wear.
• Tüm montaj donanımının sıkı ve güvenli bir şekilde yerinde olduğundan emin olun.
• If any damage is observed, disconnect power and contact a qualified electrician for repair or replacement.

6. Sorun Giderme

If you experience issues with your FFLED39 floodlight, refer to the following troubleshooting guide:

If the problem persists after following these steps, contact RAB Lighting customer support or a qualified electrician.

7. Özellikler

Detailed technical specifications for the RAB Lighting FFLED39 Future Flood LED Light:

Figure 4: Indication of 100,000-hour LED lifespan

8. Garanti ve Destek

Üretici Garantisi:

The RAB Lighting FFLED39 Future Flood LED Light is covered by a 1 yıllık üretici garantisi Satın alma tarihinden itibaren geçerlidir. Bu garanti, normal kullanım ve servis koşulları altında malzeme ve işçilik kusurlarını kapsar.

The warranty does not cover damage resulting from improper installation, accident, misuse, abuse, negligence, or unauthorized modification or repair.

Müşteri Desteği:

For technical assistance, warranty claims, or further information, please contact RAB Lighting customer support. Refer to the official RAB Lighting webGüncel iletişim bilgileri için siteyi ziyaret edin.