Audio-Technica AT-LP60 Fully Automatic Belt-Drive Stereo Turntable

giriiş

The Audio-Technica AT-LP60 is a fully automatic belt-drive stereo turntable designed for playing 33-1/3 and 45 RPM records. It features a built-in switchable phono pre-amplifier, allowing direct connection to various audio systems and powered speakers. The turntable is equipped with an integral Audio-Technica Dual Magnet phono cartridge with a replaceable stylus.

Temel Özellikler:

• Fully automatic operation for 33-1/3 and 45 RPM records.
• Built-in switchable phono pre-amplifier with RCA output cables.
• Integral Audio-Technica Dual Magnet phono cartridge with replaceable diamond stylus.
• Anti-resonance die-cast aluminum platter to minimize vibration.
• Damped lift/cueing mechanism with front-panel control.
• Removable dust cover for protection.

Paket İçeriği

• AT-LP60 Turntable Unit
• Toz Kapağı
• Tahrik kayışlı tepsi
• Kayma Minderi
• 45 RPM Adaptör
• RCA Ses Kablosu
• Güç Adaptörü

Kurulum Talimatları

1. Paketin açılması: Tüm bileşenleri ambalajından dikkatlice çıkarın. Ambalajı, ilerideki taşıma veya depolama için saklayın.
2. Platter Montajı: Place the platter onto the turntable spindle. Ensure it sits correctly.
3. Kemer Kurulumu: Locate the drive belt around the inner rim of the platter and stretch it over the motor pulley. Ensure the belt is flat and not twisted.
4. Slip Mat Placement: Place the felt slip mat on top of the platter.
5. Toz Kapağı Eklentisi: Attach the hinged dust cover to the back of the turntable.
6. Ses Bağlantısı: Connect the RCA audio cables from the turntable to your audio system (receiver, amplifier, or powered speakers). If your audio system has a dedicated "PHONO" input, connect directly to it. If not, ensure the turntable's built-in pre-amplifier is switched ON (located on the rear panel) and connect to a standard "LINE" input.
7. Güç Bağlantısı: Connect the power adapter to the turntable and then to a wall outlet.

Image: Audio-Technica AT-LP60BK Turntable with dust cover open, showing a record on the platter. This image illustrates the turntable ready for use, with the dust cover raised and a record placed on the platter.

Kullanım Talimatları

1. Güç Açık: Ensure the turntable is connected to power and your audio system is on.
2. Yer Kaydı: Carefully place a vinyl record on the platter, centering it on the spindle. For 7-inch records, use the included 45 RPM adapter if needed.
3. Kayıt Boyutunu Seçin: Use the "SIZE" selector switch (usually 12" or 7") to match the size of your record.
4. Hızı Seçin: Use the "SPEED" selector switch (33 or 45 RPM) to match the playback speed of your record.
5. Oynatmayı Başlat (Otomatik): Basın BAŞLANGIÇ button. The tonearm will automatically move to the beginning of the record and lower the stylus.
6. Oynatmayı Durdur (Otomatik): Basın DURMAK Düğmeye basın. Kol otomatik olarak kalkacak, yerine geri dönecek ve plak dönmeyi durduracaktır.
7. Manual Cueing: To manually place the stylus, use the TONEARM ASANSÖR lever to raise the tonearm. Position the tonearm over the desired track, then lower the lever to gently drop the stylus onto the record.

Bakım

• Toz Kapağı: Clean the dust cover gently with a soft, dry cloth. Avoid abrasive cleaners.
• Kalem Bakımı: Regularly clean the stylus using a soft brush designed for stylus cleaning, brushing from back to front. Replace the stylus when sound quality degrades or after approximately 300-500 hours of use.
• Pikap Gövdesi: Wipe the turntable body with a soft, dry cloth. Do not use harsh chemicals or solvents.
• Kayışın Değiştirilmesi: The drive belt may need replacement after extended use. Refer to the full manual for specific instructions on belt replacement.

Sorun giderme

• Güç Yok: Ensure the power adapter is securely connected to both the turntable and a working electrical outlet.
• Ses Yok veya Düşük Ses:
  • Check all audio cable connections between the turntable and your audio system.
  • Verify the PHONO/LINE switch on the turntable's rear panel is set correctly for your audio system's input.
  • Ensure your audio system's input selector is set to the correct input.
  • Check the volume level on your audio system.
• Ses kesintisi veya bozulması:
  • Clean the record thoroughly.
  • Check the stylus for dirt or damage; clean or replace if necessary.
  • Ensure the turntable is placed on a stable, level surface.
• Tepsi dönmüyor:
  • Check if the drive belt is properly seated around the platter and motor pulley.
  • Ensure the power is connected and the turntable is switched on.

Özellikler

Garanti ve Destek

The Audio-Technica AT-LP60 turntable comes with a 1 Yıl Garanti Satın alma tarihinden itibaren geçerlidir. Lütfen garanti talepleriniz için satın alma belgenizi saklayın.

For technical support, troubleshooting assistance, or warranty service, please contact Audio-Technica customer support through their official website veya ürün ambalajınızda yer alan iletişim bilgileri.

You can also visit the official Audio-Technica website for FAQs, additional resources, and product registration.