TEC TC-450

TEC TC-450 Mobil Fono Önamp Kullanıcı Kılavuzu

Model: TC-450 | Brand: TEC

giriiş

The TEC TC-450 is a versatile mobile phono preamplifier designed to enhance your audio experience with turntables. It features a 70dB signal-to-noise ratio and a maximum distortion of 0.05%, ensuring clear and accurate sound reproduction. This unit offers flexible power options, operating on a single 9-volt battery for portability or via the included AC power adapter for continuous use. Its compact size and durable metal construction provide excellent shielding against noise, making it ideal for both home and on-the-go listening or recording.

TEC TC-450 Mobil Fono Önamp with AC Adapter

Resim: The TEC TC-450 Mobile Phono Preamp unit shown alongside its included AC power adapter. The preamp is a compact, dark gray rectangular box with a power switch on the front panel.

Güvenlik Bilgileri

  • Üniteyi çalıştırmadan önce tüm talimatları okuyun.
  • Bu cihazı yağmura veya neme maruz bırakmayın.
  • Havalandırma açıklıklarını kapatmayın. Üreticinin talimatlarına uygun şekilde kurulum yapın.
  • Radyatörler, kalorifer ızgaraları, sobalar veya diğer cihazlar (dahil) gibi herhangi bir ısı kaynağının yakınına kurmayın. amp(ısı üreten)
  • Sadece üretici tarafından belirtilen aparatları/aksesuarları kullanın.
  • Yıldırımlı havalarda veya uzun süre kullanılmayacaksa bu cihazın fişini çekin.
  • Tüm servis işlemleri için kalifiye servis personeline başvurun. Cihaz herhangi bir şekilde hasar gördüğünde servis gereklidir.

Paket İçeriği

Lütfen paketi aşağıdaki öğeler açısından kontrol edin:

  • TEC TC-450 Mobil Fono Önamp Birim
  • AC Power Adaptor (universal)
  • RCA Kablosu
  • Miniplug Adaptor

Ürün Bittiview

Ön Panel

The front panel of the TC-450 features a simple power switch to turn the unit ON or OFF.

Arka Panel

The rear panel provides all necessary audio input and output connections, as well as the power input.

Rear panel of TEC TC-450 Phono Preamp

Resim: Arka view of the TEC TC-450 Phono Preamp, showing the input and output RCA jacks, ground terminal, and DC12V power input. The inputs are labeled "PHONO (MM)" and outputs "Amp/Receiver".

  • PHONO (MM) Input: RCA jacks for connecting your turntable.
  • OUTPUT (Amp/Receiver): RCA jacks for connecting to your amplifier or receiver's auxiliary input.
  • Yer Terminali: For connecting the ground wire from your turntable to reduce hum.
  • DC12V Güç Girişi: For connecting the included AC power adapter.

Kurmak

1. Üniteye Güç Verme

The TC-450 can be powered by either a 9-volt battery or the included AC power adapter.

  • Pil ile Çalışma:
    1. Cihazın alt kısmında bulunan pil bölmesini bulun.
    2. Unscrew the two screws to open the compartment.
    3. Insert one 9-volt battery (not included), ensuring correct polarity.
    4. Close the compartment and secure with the screws.
  • AC Güç Çalışması:
    1. Connect the included AC power adapter to the DC12V input on the rear panel of the TC-450.
    2. AC güç adaptörünü standart bir duvar prizine takın.
    AC Power Adapter for TEC TC-450

    Resim: The included AC power adapter, featuring a standard two-prong plug and a barrel connector for the preamp.

2. Ses Bağlantıları

Follow these steps to connect your turntable to your ampAmplifikatör veya alıcı:

  1. Pikapınızın RCA çıkış kablolarını bağlayın. PHONO (MM) Input jacks on the rear panel of the TC-450. Ensure left and right channels are correctly matched (red for right, white/black for left).
  2. Connect the included RCA cable from the OUTPUT (Amp/Receiver) jacks on the rear panel of the TC-450 to an available auxiliary (AUX) input on your amplifier or receiver. Do not connect to a "Phono" input on your receiver, as this will result in over-ampIzilasyon ve bozulma.
  3. Pikapınızda topraklama kablosu varsa, onu şuraya bağlayın: Topraklama Terminali on the rear panel of the TC-450. This helps to minimize hum and noise.
Connection diagram for TEC TC-450 Phono Preamp

Resim: A diagram illustrating the connection of a turntable to the TEC TC-450 Phono Preamp, and then from the preamp birine amplifier/receiver's auxiliary input. It also shows the optional DC12V adapter and 9V battery power options, and the ground wire connection.

Kullanım Talimatları

  1. Ensure all connections are secure as described in the "Setup" section.
  2. Aç şunu amplifier or receiver and select the input source to which the TC-450 is connected (e.g., AUX, CD, LINE IN).
  3. Flip the power switch on the front panel of the TC-450 to the ON konum.
  4. Start playing your record on the turntable. Adjust the volume on your amplifier or receiver to your desired listening level.
  5. When finished, flip the power switch on the TC-450 to the KAPALI position and turn off your other audio equipment.

The TC-450 applies RIAA equalization, which is essential for accurate playback of vinyl records, ensuring a flat frequency response from 20Hz to 20,000Hz with a tolerance of +/- 0.5dB.

Bakım

  • Temizlik: Cihazın dış yüzeyini temizlemek için yumuşak, kuru bir bez kullanın. Sıvı temizleyiciler veya aerosoller kullanmayın.
  • Pil Değişimi: If using battery power and the sound becomes weak or distorted, replace the 9-volt battery as described in the "Setup" section.
  • Depolamak: If the unit will not be used for an extended period, remove the 9-volt battery to prevent leakage. Store in a cool, dry place.

Sorun giderme

SorunOlası NedenÇözüm
Hiç ses yok veya çok az ses var.
  • Cihaz açık değil.
  • Yanlış giriş seçildi. ampkaldırıcı/alıcı.
  • Kablolar düzgün bağlanmamış.
  • Weak or dead 9V battery (if applicable).
  • Connected to "Phono" input on receiver instead of "AUX".
  • Güç anahtarının AÇIK olduğundan emin olun.
  • Select the correct input (e.g., AUX, CD, LINE IN) on your ampkaldırıcı/alıcı.
  • Check all RCA cable connections.
  • 9V pili değiştirin veya AC adaptör kullanın.
  • Connect to a non-phono input (e.g., AUX).
Uğultu veya vızıltı sesi.
  • Ground wire not connected.
  • Gevşek kablo bağlantıları.
  • Diğer elektronik cihazlardan kaynaklanan parazit.
  • Connect the turntable's ground wire to the TC-450's ground terminal.
  • Ensure all RCA cables are securely connected.
  • Move the unit away from other electronic devices or power cables.
Bozuk ses.
  • Weak 9V battery.
  • Connected to "Phono" input on receiver.
  • 9V pili değiştirin veya AC adaptör kullanın.
  • Connect to a non-phono input (e.g., AUX).

Özellikler

  • Modeli: TC-450
  • Sinyal-Gürültü Oranı (S/N): >70dB
  • Maximum Distortion: %0.05
  • RIAA Frequency Response: 20Hz-20,000Hz +/- 0.5dB
  • Güç Kaynağı: 9V battery (not included) or DC12V AC adapter (included)
  • Krikolar: Gold-plated RCA
  • Casing: Black anodized metal
  • Ebatlar (Paket): 6 x 4 x 3 inç (yaklaşık)
  • Ürün Ağırlığı: 1.45 pound (yaklaşık)
  • Sertifikalar: CE sertifikalı

Garanti ve Destek

This product comes with a standard manufacturer's warranty. For specific warranty details, please refer to the documentation included with your purchase or contact your retailer. For technical support or service inquiries, please contact the manufacturer or your point of purchase.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.