Focusrite ISA Two Dual Mono Microphone Preamplifier Kullanım Kılavuzu

Ürün Bittiview

The Focusrite ISA Two is a classic dual mono transformer-based microphone preamplifier designed for professional audio recording. It incorporates the renowned Lundahl LL1538 mic input transformer, originally selected by Rupert Neve for the ISA 110, ensuring exceptional audio quality.

Temel özellikler şunlardır:

• Lundahl LL1538 Transformer: Utilizes the high-quality Lundahl LL1538 mic input transformer for superior sound.
• High Gain and Low Noise: Offers up to 80 dB of clean gain on the microphone input with minimal noise.
• Değişken Giriş Empedansı: Four selectable input impedance settings, including the original ISA 110 value, allow for optimal matching with various microphones.
• User-Calibrated Metering: Each channel features an eight-LED array for clear level display, with a rear panel calibration knob to match DAW converters.
• Çok Yönlü Girişler: Two 1/4-inch front panel DI inputs for instruments and rear panel TRS line inputs.
• Yüksek geçiren filtre: An 18dB/octave high-pass filter, based on the ISA 110 module, is built-in for precise low-frequency control.
• Balanced Inserts: Each channel includes balanced insert points (1/4-inch TRS send and receive) for integrating external hardware processors.

Şekil 1: Ön view of the Focusrite ISA Two preamplifier, showcasing its controls and metering.

Paket İçeriği

Paketin içinde tüm öğelerin mevcut olduğundan emin olun:

• Focusrite ISA Two Unit
• IEC Güç Kablosu

Kurulum Kılavuzu

Follow these steps to set up your ISA Two preampkaldırıcı:

1. Raf Montajı Kurulumu: The ISA Two is designed for standard 19-inch rack mounting. Secure the unit using appropriate rack screws.
2. Güç Bağlantısı: Connect the supplied IEC power cable to the rear panel power inlet and then to a suitable AC power source. Ensure the power switch is in the OFF position before connecting.
3. Mikrofonları Bağlama: Use balanced XLR cables to connect your microphones to the 'MIC INPUT' XLR connectors on the rear panel for each channel.
4. Connecting Line Sources: For line-level signals, use balanced TRS cables to connect to the 'LINE INPUT' TRS connectors on the rear panel.
5. Aletlerin Bağlanması: For instruments such as guitars or basses, use 1/4-inch jack cables to connect to the 'Instrument Inputs' on the front panel.
6. Çıkış Bağlantıları: Connect the 'OUTPUT' XLR connectors on the rear panel to your audio interface, mixer, or other recording equipment using balanced XLR cables.
7. Insert Connections: If using external hardware processors, connect them to the 'SEND' and 'RETURN' 1/4-inch TRS jacks on the rear panel for each channel.

Figure 2: Rear panel of the Focusrite ISA Two, showing microphone, line, output, and insert connections.

Kullanım Talimatları

This section details the operation of the ISA Two preamplifier's controls:

1. Güç Açık: After all connections are made, switch the power button on the front panel to the ON position.
2. Giriş Seçimi: Use the 'Input' buttons (Mic, Line, Inst) to select the appropriate input source for each channel. Ensure only one input type is active per channel.
3. Kazanç Kontrolü: The large 'Gain' knob adjusts the primary gain level (e.g., 0-30 dB, 30-60 dB). The smaller 'Trim' knob provides fine-tuning (+/-10 dB) for precise level setting.
4. Variable Input Impedance (Z In): For microphone inputs, select one of the four impedance settings (Low, ISA 110, Med, High) to optimize the interaction with your microphone. Experiment to find the best sonic match.
5. Fantom Gücü (+48V): Activate the +48V button for condenser microphones that require phantom power. Ensure the microphone is connected before engaging phantom power.
6. Yüksek Geçişli Filtre (HPF): Engage the 'Filter' button and use the 'High Pass Filter' knob to remove unwanted low-frequency rumble or proximity effect. The filter offers an 18dB/octave slope.
7. Insert Function: Press the 'Insert' button to engage any external hardware processors connected to the rear panel insert points.
8. Ölçüm: Monitor your signal levels using the eight-LED array. Adjust gain and trim to achieve optimal levels without clipping (red LEDs). The VU meter provides an average level indication.

For a visual demonstration of the ISA Two in action, watch the official product video:

Bakım

To ensure the longevity and optimal performance of your Focusrite ISA Two, follow these maintenance guidelines:

• Temizlik: Cihazın dış yüzeyini temizlemek için yumuşak, kuru bir bez kullanın. Aşındırıcı temizleyicilerden, çözücülerden veya cilalardan kaçının.
• Havalandırma: Ensure adequate airflow around the unit, especially if rackmounted, to prevent overheating.
• Depolamak: When not in use for extended periods, store the unit in a cool, dry environment away from direct sunlight and extreme temperatures.
• Kablo yönetimi: Keep cables organized and free from kinks or excessive tension to prevent damage to connectors and the unit.

Sorun giderme

If you encounter issues with your ISA Two, consider the following common troubleshooting steps:

• Güç Yok: Check the power cable connection to both the unit and the wall outlet. Ensure the power switch is ON.
• Ses Çıkışı Yok: Verify all input and output cables are securely connected. Check the input selection (Mic, Line, Inst) and ensure phantom power is engaged if using a condenser microphone. Confirm gain levels are appropriately set.
• Bozuk Ses: Reduce the input gain and trim levels. Check for proper impedance matching with your microphone. Ensure no cables are damaged.
• Kesintili Sinyal: Inspect all cable connections for looseness or damage. Try swapping cables to isolate a faulty one.
• Noise/Hum: Ensure all equipment is properly grounded. Check for nearby sources of electromagnetic interference.

If problems persist after these steps, contact Focusrite support for further assistance.

Teknik Özellikler

Garanti ve Destek

The Focusrite ISA Two comes with a 2 yıllık garanti Satın alma tarihinden itibaren, normal kullanımda üretim hataları ve arızaları kapsar.

For technical support, product registration, or to view the full warranty terms and conditions, please visit the official Focusrite webSiteye göz atabilirsiniz. Ayrıca orada sıkça sorulan soruları ve ek kaynakları da bulabilirsiniz.

Çevrimiçi destek: www.focusrite.com/support