1. Giriş ve Ürün Hakkındaview
The ELDOM 72325PMP is a high-performance 10-liter under-sink electric water heater designed for domestic use. This appliance provides instant hot water for various needs, featuring a durable steel tank with enamel coating and active anode protection for enhanced corrosion resistance. It incorporates a non-return valve to prevent overpressure and a precise temperature regulator for user-controlled water heating. This device is manufactured in the EU, ensuring quality and reliability.
Şekil 1.1: ELDOM 72325PMP 10 Liter Under-Sink Water Heater with included safety valve.
Temel Özellikler:
- Kapasite: 10 Litre
- Güç: 2000 B
- Çalışma Prensibi: Under-sink, pressure-resistant
- Korozyon Koruması: High-performance steel tank with enamel and anode protection
- Emniyet: Integrated non-return valve, overheating protection, high water pressure protection
- Sıcaklık Kontrolü: Ayarlanabilir termostat
- Sıçramalara Karşı Koruma: IP24 dereceli
2. Güvenlik Talimatları
Kurulum ve çalıştırmadan önce lütfen tüm güvenlik talimatlarını dikkatlice okuyun. Bu talimatlara uyulmaması elektrik çarpmasına, yangına, maddi hasara veya kişisel yaralanmaya neden olabilir.
- Elektriksel Güvenlik: Ensure the power supply matches the appliance's rating (230V/50Hz). Always connect the unit to a properly grounded outlet. Do not operate with a damaged power cord or plug. Disconnect power before any maintenance or repair.
- Su Basıncı: The unit is designed for a nominal pressure of 0.8 MPa (8 Bar). An integrated non-return valve prevents excessive pressure build-up. If local water pressure exceeds this, a pressure reducing valve may be required.
- Kurulum: Installation must be performed by a qualified technician in accordance with local regulations and plumbing codes. Ensure the unit is securely mounted under the sink.
- Su Bağlantısı: Use 1/2 inch connections. Ensure all connections are watertight to prevent leaks.
- Kullanım: Do not block the safety valve outlet. Do not operate the water heater if it is empty or if there is a risk of freezing.
- Çocuklar ve Savunmasız Kişiler: Bu cihaz, 8 yaş ve üzeri çocuklar ve fiziksel, duyusal veya zihinsel yetenekleri azalmış veya deneyim ve bilgi eksikliği olan kişiler tarafından, cihazın güvenli bir şekilde kullanımıyla ilgili gözetim veya talimat verilmişse ve içerdiği tehlikeleri anlamışlarsa kullanılabilir. Çocuklar cihazla oynamamalıdır. Temizlik ve kullanıcı bakımı gözetim olmaksızın çocuklar tarafından yapılmamalıdır.
3. Paket İçeriği
Paketi açtığınızda tüm bileşenlerin mevcut ve hasarsız olduğunu doğrulayın:
- ELDOM 72325PMP Water Heater Unit
- Combined non-return valve / safety valve
- Fişli güç kablosu
- Montaj donanımı (vidalar, dübeller)
- Kullanım Kılavuzu (bu belge)
4. Kurulum ve Kurulum
The ELDOM 72325PMP is designed for under-sink installation. It is crucial that installation is carried out by a qualified professional to ensure safety and proper functioning.
Kurulum Adımları:
- Montaj: Securely mount the water heater unit under the sink using the provided mounting hardware. Ensure the surface is strong enough to support the unit's weight when full (approx. 17.6 kg).
- Su Bağlantısı:
- Connect the cold water inlet (marked blue) to the main cold water supply using 1/2 inch fittings.
- Install the combined non-return valve on the cold water inlet. This valve is essential for safe operation and prevents backflow and overpressure.
- Connect the hot water outlet (marked red) to the hot water tap/mixer.
- Ensure all connections are sealed properly to prevent leaks.
- Tankın Doldurulması: Before connecting to power, open the hot water tap to allow air to escape and the tank to fill completely with water. Once water flows steadily from the hot water tap, close the tap.
- Elektrik Bağlantısı: Plug the power cable into a grounded 230V/50Hz electrical outlet. Ensure the outlet is easily accessible.
Şekil 4.1: Simplified installation diagram. 1. Shut-off valve, 2. Reducing valve (if water pressure exceeds 0.6MPa), 3. Combined non-return valve.
5. Kullanım Talimatları
Once installed and filled with water, the ELDOM 72325PMP is ready for operation.
Güç Açma/Kapatma:
- Locate the power switch on the front of the unit.
- Press the switch to the 'I' position to turn the unit on. The indicator light will illuminate.
- Press the switch to the 'O' position to turn the unit off.
Sıcaklık Düzenlemesi:
- The unit features a rotary thermostat knob on the front panel.
- Turn the knob clockwise to increase the water temperature and counter-clockwise to decrease it.
- The maximum factory-set temperature is 75°C.
Isıtma Döngüsü:
The 2000W heating element can heat the 10-liter tank from 12°C to 65°C in approximately 19 minutes. The unit will automatically maintain the set temperature.
6. Bakım
Düzenli bakım, su ısıtıcınızın uzun ömürlü ve verimli çalışmasını sağlar.
- Anode Protection: The unit is equipped with an anode for corrosion protection. This anode should be inspected and replaced periodically by a qualified technician, typically every 1-2 years, depending on water quality.
- Emniyet Vanası: Periodically check the safety valve for proper operation. Refer to the safety valve manufacturer's instructions for specific testing procedures.
- Temizlik: Ünitenin dışını yumuşak bir bezle temizleyin.amp bezle silin. Aşındırıcı temizleyiciler veya çözücüler kullanmayın.
- Kireç çözme: In areas with hard water, limescale can build up inside the tank. Descaling should be performed by a qualified technician when necessary to maintain heating efficiency.
7. Sorun Giderme
Müşteri desteğiyle iletişime geçmeden önce lütfen aşağıdaki sorun giderme kılavuzuna bakın:
| Sorun | Olası Neden | Çözüm |
|---|---|---|
| Sıcak su yok | No power supply; Thermostat set too low; Overheating protection activated | Check power connection and circuit breaker; Adjust thermostat setting; Reset overheating protection (if applicable, consult technician) |
| Su yeterince sıcak değil | Thermostat set too low; Limescale buildup; Insufficient heating time | Increase thermostat setting; Descale the unit (contact technician); Allow more time for heating |
| Water leaking from safety valve | Normal expansion during heating; Faulty safety valve; Excessive incoming water pressure | This is normal during heating. If continuous or excessive, check incoming water pressure and consider a pressure reducing valve. Replace faulty safety valve (contact technician). |
| Ünite alışılmadık sesler çıkarıyor | Limescale buildup; Loose components | Descale the unit (contact technician); Inspect for loose parts (contact technician) |
For problems not listed here or if solutions do not resolve the issue, please contact qualified service personnel.
8. Teknik Özellikler
Detailed technical data for the ELDOM 72325PMP water heater:
| Şartname | Değer |
|---|---|
| Örnek | 72325PMP |
| Marka | ELDOM |
| Anma Gücü | 2000 B |
| Anma Hacmitage | 230 V / 50 Hz |
| Çalışma Prensibi | Under-sink, pressure-resistant |
| Nominal basıncı | 0.8 MPa (8 Bar) |
| Su Bağlantısı | 1/2 inç |
| Elektriksel bağlantı | Fişli kablo |
| Koruma Sınıfı | IP24 (sıçramaya dayanıklı) |
| Boyutlar (Y x G x D) | 430x285x285 mm |
| Ağırlık | 7.6 kilo |
| Kapasite | 10 Litre |
| Enerji Verimliliği Sınıfı | B |
| Yıllık Elektrik Tüketimi | 573 kWh/annum (EU Regulation 812/2013) |
| Ses Gücü Seviyesi | 15 dB |
| Termostat Ayarı | 75 °C |
Şekil 8.1: ELDOM 72325PMP Product Data Sheet.
Şekil 8.2: EU Energy Label for ELDOM 72325PMP, indicating Class B efficiency.
Further product information can be found in the EPREL database: https://eprel.ec.europa.eu/qr/30997
9. Garanti ve Destek
ELDOM products are manufactured to high quality standards. For warranty information, technical support, or service inquiries, please contact ELDOM customer service.
İletişim Bilgileri:
- Üretici: ELDOMINVEST OOD
- Webalan: https://eldominvest.com/
- Teknik Destek E-postası: tech@eldominvest.com
- Telefon: +359 52 571 914
- Adres: Blvd. "Vladislav Varnenchik" / Boulevard "Vladislav Varnenchik" 275A, 9009 Varna, Bulgaria