Telwin ALPINE 30

Telwin Alpine 30 BOOST Car Battery Charger User Manual

Model: ALPINE 30

giriiş

This manual provides essential instructions for the safe and efficient operation of your Telwin Alpine 30 BOOST Car Battery Charger. Please read this manual thoroughly before use and retain it for future reference. This charger is designed for charging free electrolyte (WET) batteries with 12V or 24V voltage.

Güvenlik Talimatları

  • Şarj cihazını daima iyi havalandırılan bir alanda kullanın.
  • Göz koruması ve eldivenler de dahil olmak üzere uygun kişisel koruyucu ekipman kullanın.
  • Ensure the charger is disconnected from the mains supply before making or breaking connections to the battery.
  • Pil kapağının kısa devre yapmasını önleyinamps.
  • Donmuş pilleri şarj etmeyin.
  • Çocukları ve yetkisiz kişileri şarj alanından uzak tutun.
  • Refer to the vehicle manufacturer's manual for specific battery charging instructions.

Ürün Bittiview

The Telwin Alpine 30 BOOST is a robust battery charger featuring protection against overloads and polarity inversions. It includes a selector for normal and rapid (BOOST) charging modes, along with an ammeter for monitoring the charging process.

Telwin Alpine 30 BOOST Car Battery Charger front view with controls and cables

Şekil 1: Telwin Alpine 30 BOOST Car Battery Charger. This image shows the front panel of the charger, including the control knobs, ammeter, and connection terminals for the battery cables.

Kurmak

  1. Atama: Position the charger on a stable, level surface in a well-ventilated area, away from flammable materials.
  2. Pil Hazırlığı: Ensure the battery terminals are clean and free of corrosion. If charging a battery in a vehicle, ensure the vehicle's ignition is off and all accessories are disconnected.
  3. Cl'yi bağlayınamps:
    • Bağlan KIRMIZI pozitif (+) clamp pilin pozitif (+) terminaline.
    • Bağlan SİYAH negatif (-) clamp Akünün negatif (-) terminaline bağlayın. Bir araca takılı bir aküyü şarj ediyorsanız, negatif terminali bağlayın.amp akü ve yakıt hattından uzakta araç şasisine.
  4. Şebeke Bağlantısı: Plug the charger's power cord into a suitable 230V AC, 50/60Hz mains outlet.

Kullanım Talimatları

  1. Cilt Seçtage: Sesi kullantage selector switch to match the battery voltage (12V veya 24V).
  2. Şarj Modunu Seçin:
    • Normal Charge: For standard charging of batteries.
    • BOOST (Rapid Charge): For faster charging when time is limited. Use with caution and monitor the battery closely to prevent overcharging.
  3. Şarj Etmeye Başlayın: Turn on the charger. The ammeter will indicate the charging current. The current will gradually decrease as the battery charges.
  4. Monitör Şarjı: Periodically check the ammeter. When the current drops to a very low level, the battery is nearly fully charged.
  5. Şarjı Sonlandır:
    • Turn off the charger.
    • Şarj cihazını elektrik prizinden çıkarın.
    • Disconnect the negative (-) clamp first, then the positive (+) clamp.

Bakım

  • Temizlik: Disconnect the charger from the mains before cleaning. Wipe the exterior with a dry, soft cloth. Do not use solvents or abrasive cleaners.
  • Depolamak: Store the charger in a dry, cool place, away from direct sunlight and moisture. Ensure cables are neatly coiled and not kinked.
  • Kablo Denetimi: Regularly inspect the power cord and battery cables for any signs of damage, such as cuts or fraying. Do not use the charger if cables are damaged.

Sorun giderme

SorunOlası NedenÇözüm
Şarj cihazı açılmıyor.Elektrik prizinden güç gelmiyor.
Arızalı güç kablosu.
Check mains outlet with another appliance.
Güç kablosunu hasar açısından inceleyin.
Ammeter shows no current.Yanlış akü bağlantısı.
Pil tamamen şarj olmuş.
Dahili sigorta atmış.
Olumlu ve olumsuz bağlantıları doğrulayın.
Pil hacmini kontrol edintage.
Sigorta değişimi için yetkili bir teknisyene danışın.
Şarj cihazı aşırı ısınıyor.Zayıf havalandırma.
Aşırı yüklenmiş devre.
Şarj cihazının etrafında yeterli hava akışı olduğundan emin olun.
Reduce charging load or switch to normal charge mode.

Sorunlar devam ederse, yetkili servis personeliyle iletişime geçin.

Özellikler

ÖrnekALPINE 30
MarkaTelvin
Giriş Voltage230 V AC (Single-phase), 240 V
Giriş Frekansı50/60 Hz
Absorbed Power (Charge)800 B
Şarj Hacmitage12V / 24VDC
Effective Charge Current30A
Conventional Charge Current (EN60335-2-29)20A
Min. Battery Capacity15Ah
Max. Battery Capacity400Ah
Regulation Positions3
Boyutlar (U x G x Y)22.5x29x20.5 cm
Ağırlık8.6 kilo
Bağlayıcı TürüSchuko plug (Type F) and battery clamps
Port Sayısı2
Menşei ülkeÇin

Garanti Bilgileri

Specific warranty details for the Telwin Alpine 30 BOOST Car Battery Charger are not provided within this manual. Please refer to the warranty card included with your product or contact the retailer/manufacturer for warranty terms and conditions.

Destek ve Hizmet

For technical assistance, spare parts, or service inquiries, please contact your authorized Telwin dealer or visit the official Telwin website. Ensure you have your product model number (ALPINE 30) and serial number (if applicable) ready when contacting support.

© 2023 Telwin. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.