1. Giriş
This manual provides instructions for the installation, operation, and maintenance of your Orbit 27954 Pocket Star 4-Station Plus Indoor Sprinkler Controller. This controller is designed to manage residential 24-volt sprinkler systems, offering dual programming capabilities and a rain delay feature.
Image 1.1: The Orbit 27954 Pocket Star 4-Station Plus Indoor Sprinkler Controller. This image displays the front panel of the controller, featuring its digital display and control buttons.
2. Güvenlik Bilgileri
Please read all instructions carefully before installation and operation. Failure to follow these instructions may result in property damage or personal injury.
- This controller is designed for indoor use only. Do not install outdoors or in areas exposed to water.
- Herhangi bir kablolama veya bakım işlemi yapmadan önce güç kaynağının bağlantısının kesildiğinden emin olun.
- All electrical wiring should comply with local codes and regulations. If you are unsure, consult a qualified electrician.
- Cihazı kendiniz tamir etmeye çalışmayın. Tüm servis işlemlerini yetkili personele yaptırın.
3. Kurulum
3.1 Paketin açılması
Carefully remove the controller from its packaging. Verify that all components are present. Retain packaging for future use or disposal.
3.2 Kontrolörün Montajı
- Choose a suitable indoor location near a standard 120V AC outlet and away from direct sunlight or extreme temperatures.
- Use the provided mounting template (if applicable) or mark the desired screw locations on the wall.
- Install mounting screws into the wall, leaving the screw heads slightly extended.
- Hang the controller onto the screws using the keyhole slots on the back of the unit.
- Secure the controller by tightening the screws.
3.3 Kablolama
Önemli: Kablolamadan önce gücü kesin.
- Güç Bağlantısı: Plug the controller's power cord into a standard 120V AC outlet.
- Vana Kablolaması: Connect one wire from each sprinkler valve to a numbered terminal (1, 2, 3, 4) on the controller. Connect the common wire from all valves to the terminal labeled 'C' (Common).
- Sensor Wiring (Optional): If using a rain sensor, connect its wires to the designated sensor terminals. Refer to your sensor's manual for specific wiring instructions.
3.4 İlk Güçlendirme
Once all wiring is complete and secure, connect the power cord to the electrical outlet. The controller display should illuminate, indicating it is powered on.
4. Kullanım Talimatları
4.1 Ekranı ve Düğmeleri Anlamak
The controller features a digital display and several buttons for navigation and programming. Familiarize yourself with the 'Program', 'Set', 'Arrow' (up/down), and 'Rain Delay' buttons.
4.2 Setting Current Time and Date
- Press the 'Set' button repeatedly until 'Set Time' appears on the display.
- Use the 'Arrow' buttons to adjust the hour, then press 'Set' to move to minutes.
- Repeat for minutes, AM/PM, year, month, and day.
4.3 Sulama Programlarının Ayarlanması
The controller supports dual programs (A and B) for flexible scheduling.
- Programı Seçin: Press the 'Program' button to select Program A or B.
- Başlangıç Saatlerini Ayarla: Press 'Set' until 'Start Time' appears. Use 'Arrow' buttons to set the desired start time for the first cycle. The controller supports multiple start times per program.
- Çalışma Sürelerini Ayarla: Press 'Set' until 'Run Time' appears. Use 'Arrow' buttons to set the duration (in minutes) for each station (1-4).
- Set Watering Days: Press 'Set' until 'Watering Days' appears. Use 'Arrow' buttons to select specific days of the week, odd/even days, or interval watering.
4.4 Manuel Çalıştırma
To manually water a station or all stations:
- Press the 'Manual' button (if available, or follow specific manual run instructions in the display menu).
- Select the desired station or 'All Stations'.
- Set the run time using the 'Arrow' buttons.
- The selected station(s) will begin watering immediately.
4.5 Yağmur Geciktirme Fonksiyonu
The rain delay feature allows you to pause watering for a set period without losing your programmed schedule.
- Press the 'Rain Delay' button.
- Use the 'Arrow' buttons to select the delay duration (e.g., 24, 48, or 72 hours).
- The controller will pause watering for the selected period and resume the schedule automatically afterward.
5. Bakım
5.1 Temizlik
Wipe the controller's exterior with a soft, damp Bez kullanın. Aşındırıcı temizleyiciler veya çözücüler kullanmayın, çünkü bunlar ekranı veya cihazı hasar verebilir.asing.
5.2 Seasonal Considerations
As an indoor controller, the unit is not directly exposed to outdoor elements. However, ensure the indoor environment remains within recommended operating temperatures to prolong its lifespan.
6. Sorun Giderme
| Sorun | Olası Neden | Çözüm |
|---|---|---|
| Kontrolör ekranı boş. | Güç yok. | Check power outlet, ensure power cord is securely plugged in. Verify circuit breaker. |
| Sprinklers do not turn on. | Incorrect programming, wiring issue, or rain sensor activated. | Verify watering schedule. Check valve wiring connections. Ensure rain sensor is not active or bypassed. |
| Only some sprinklers turn on. | Faulty valve, wiring issue to specific station. | Check wiring for the non-working station. Test the valve manually. |
| Sulama yanlış zamanlarda yapılıyor. | Incorrect time/date setting or program schedule. | Verify current time and date. Review and adjust program start times and watering days. |
7. Özellikler
- Modeli: Orbit 27954 Pocket Star 4-Station Plus Indoor Controller
- Marka: Yörünge
- Parça Numarası: 27954
- İstasyon Sayısı: 4
- Cilttage: 24 Volt (AC)
- İnsan Arayüzü Girişi: Düğmeler
- Gerekli Piller: HAYIR
- Kurulum: Kapalı
- Özellikler: Dual program, Rain delay
- Paket Boyutları: 21.84x13.46x6.6 cm
- Ağırlık: 226.8 gr
8. Garanti ve Destek
Garanti bilgileri veya teknik destek için lütfen resmi Orbit web sitesine başvurun. webSite üzerinden veya müşteri hizmetleri departmanıyla iletişime geçin. Satın alma belgenizi saklayın.