SEM15163

SEM Presidio Interior Paint Aerosol (Model 15163) Instruction Manual

Brand: SEM | Model: 15163

giriiş

This manual provides detailed instructions for the safe and effective use of the SEM Presidio Interior Paint Aerosol, Model 15163. This product is designed for coating interior surfaces such as metal, plastic, and vinyl, offering a matte finish. Please read all instructions carefully before use.

SEM Presidio Interior Paint Aerosol can and color swatch

Image: SEM Presidio Interior Paint Aerosol can, 12 oz, with a black color swatch. The label indicates "COLOR COAT Flexible Coating" and model number 15163.

Güvenlik Bilgileri

UYARI: This product is an extremely flammable aerosol. Contents under pressure. Vapors may cause flash fire. Harmful if swallowed. Vapors harmful. Causes serious eye irritation. Causes skin irritation. Read all cautions on the back panel of the can before use.

  • İyi havalandırılan bir ortamda kullanınız.
  • Isıdan, kıvılcımlardan, açık alevlerden ve sıcak yüzeylerden uzak tutun. Sigara içilmez.
  • Konteynerleri delmeyin veya yakmayın.
  • 120°F (49°C) üzerindeki sıcaklıklara maruz bırakmayın.
  • Eldiven ve göz koruması gibi uygun kişisel koruyucu ekipman giyin.
  • Avoid breathing vapors or spray mist.
  • Çocukların erişemeyeceği yerde saklayınız.
  • İçeriği/kabı yerel yönetmeliklere uygun olarak atın.

Öneri 65 Uyarısı: Bu ürün, Kaliforniya Eyaleti tarafından kansere ve doğum kusurlarına veya üremeyle ilgili diğer zararlara neden olduğu bilinen kimyasallar içerebilir.

Kurulum ve Hazırlık

  1. Yüzey Temizliği: Thoroughly clean the surface to be painted with a suitable wax and grease remover. Ensure the surface is free of dirt, oil, wax, and other contaminants.
  2. Yüzey Hazırlığı: For optimal adhesion, lightly abrade smooth surfaces with fine-grit sandpaper (e.g., 400-600 grit wet/dry) or a scuff pad. Re-clean the abraded surface to remove any dust.
  3. Maskeleme: Mask off any areas not intended for painting using painter's tape and masking paper or plastic.
  4. Çevresel Koşullar: Ensure the application area is well-ventilated. Apply paint in a temperature range of 50°F to 85°F (10°C to 29°C) and moderate humidity. Avoid direct sunlight or extremely humid conditions.
  5. Test Spreyi: Always perform a test spray on an inconspicuous area or a test panel to verify color match and adhesion before applying to the main surface.

Kullanım Talimatları (Uygulama)

  1. Kutuyu çalkalayın: Shake the aerosol can vigorously for at least one minute after the mixing ball begins to rattle. Continue to shake occasionally during application.
  2. Uygulama Tekniği: Hold the can approximately 8-10 inches (20-25 cm) from the surface. Apply light, even coats using a steady, sweeping motion. Overlap each pass slightly for uniform coverage.
  3. Çoklu Katlar: Apply 2-3 light coats to achieve desired color and coverage. Allow sufficient flash-off time between coats (typically 5-10 minutes, or until the surface is tacky but not wet).
  4. Kuruma Süresi: The paint will be dry to the touch within an hour. For full cure and maximum durability, allow 24 hours. Avoid handling or exposing the painted surface to moisture during the curing process.

Bakım ve Depolama

  • Can Clean-up: After each use, invert the can and spray for a few seconds until only clear propellant comes out. This prevents the nozzle from clogging. Wipe the nozzle clean.
  • Depolamak: Store the aerosol can in a cool, dry place between 50°F and 85°F (10°C and 29°C). Do not store in direct sunlight or where temperatures may exceed 120°F (49°C).
  • İmha etmek: Dispose of empty cans or unused product according to local hazardous waste regulations.

Sorun giderme

SorunOlası NedenÇözüm
Uneven Coverage / StreaksImproper shaking, inconsistent spray distance, too thick coats.Shake can thoroughly. Maintain consistent 8-10 inch distance. Apply multiple light coats.
Zayıf YapışmaInadequate surface cleaning or preparation.Ensure surface is clean and free of contaminants. Lightly abrade smooth surfaces.
Nozül TıkanmasıPaint dried in nozzle.Invert can and spray until clear propellant appears after each use. If clogged, try soaking nozzle in mineral spirits.
Drips or RunsApplying too much paint in one coat, holding can too close.Apply thinner coats. Increase spray distance to 8-10 inches.

Ürün Özellikleri

  • Marka: SEM
  • Model Adı: Başkanlık
  • Parça Numarası: 15163
  • Renk: Black (Presidio)
  • Bitiş Türü: Mat
  • Ürün Formu: Aerosol
  • Ürün Hacmi: 12 Fluid Ounces (340g)
  • Belirli Kullanımlar: İç yüzeyler
  • Yüzey Önerisi: Metal, Plastic, Vinyl
  • Özel Özellikler: Fade Resistant, Low VOC
  • Kapsam: Yüksek
  • Dry Time (Touch): Yaklaşık 1 saat
  • Tam Kürlenme Süresi: 24 Saat
  • Suya Dayanıklılık Seviyesi: Suya dayanıklı değil
  • Ürün Ağırlığı: 1 pound
  • Paket Boyutları: 8.11 x 2.56 x 2.56 inç

Garanti Bilgileri

No specific warranty information is provided in the product details. For details regarding product warranty, please contact SEM directly or refer to their official webalan.

Müşteri Desteği

For technical assistance, product inquiries, or safety data sheets, please contact the manufacturer:

Üretici: SEM

Please visit the official SEM webİletişim bilgileri ve diğer kaynaklar için siteyi ziyaret edin.

© 2023 SEM Products. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.