My Weigh Triton T2 Digital Pocket Scale

giriiş

This manual provides detailed instructions for the proper use and maintenance of your My Weigh Triton T2 Digital Pocket Scale. Designed for precision and durability, this scale offers accurate measurements for various applications. Please read this manual thoroughly before operating the device.

Güvenlik Önlemleri ve Kullanım Kuralları

• Kapasiteyi aşmayın: Never exceed the maximum capacity of 120 grams for the Triton T2 scale at any time. Overloading can damage the weighing mechanism.
• Kararlı Yüzey: Always place the scale on a flat, stable surface. Ensure the scale is not exposed to vibrations, air currents, extreme temperatures, or dust, as these can affect accuracy.
• Alıştırma: When turning the scale on, allow it to self-test and acclimate. The display will typically show '0.0' when ready.
• Expansion Tray: The protective cover is removable when fully open and can be used as an expansion tray for weighing larger items.
• Kararlı Okumalar: The display may show slight fluctuations due to the extreme sensitivity of the scale. The correct reading is achieved when the readout becomes stable.

Kurmak

Pil Kurulumu

The My Weigh Triton T2 scale requires 2 AAA batteries, which are included. To install or replace batteries, locate the battery compartment on the underside of the scale, open the cover, insert the batteries according to the polarity indicators, and close the compartment securely.

İlk Yerleştirme

Place the scale on a firm, level, and stable surface, away from drafts, vibrations, and extreme temperature changes. This ensures optimal performance and accuracy.

Kullanım Talimatları

Güç Açık/Kapalı

• Terazinin dengesini değiştirmek için ON, tuşuna basın AÇIK/KAPALI button (red button). The display will show '88888' then '0.0' or '0.00'.
• Terazinin dengesini değiştirmek için KAPALI, tuşuna basın ve basılı tutun AÇIK/KAPALI ekran kapanana kadar düğmesine basın.

Tartım Prosedürü

1. Turn the scale on and wait for it to stabilize at '0.0'.
2. Tartılacak nesneyi nazikçe tartım platformunun ortasına yerleştirin.
3. LCD ekranda görüntülenen sabit ağırlığı okuyun.

Birim Dönüşümü

The Triton T2 scale can display weight in multiple units. To change the weighing unit:

• Tartı açıkken, basın. BİRİM button repeatedly to cycle through available units: Grams (g), Ounces (oz), Troy Ounces (ozt), and Pennyweight (dwt).
• Seçilen ünite ekranda gösterilecektir.

Dara İşlevi

The Tare function allows you to subtract the weight of a container, so you only measure the contents.

1. Tartım platformuna boş bir kap yerleştirin.
2. Basın DARA button (often labeled '-0-' or 'T'). The display will reset to '0.0'.
3. Tartılacak ürünleri kaba ekleyin. Ekranda sadece ürünlerin net ağırlığı görünecektir.

Using the Expansion Tray

The scale's protective cover can be detached and inverted to serve as an expansion tray, providing a larger surface for weighing items. Simply open the cover fully, detach it, and place it upside down on the weighing platform.

Kalibrasyon

Calibration ensures the accuracy of your scale. A 100g calibration weight (not included) is required for this procedure.

1. Turn the scale KAPALI and place it on a flat, stable surface.
2. Basılı tutun BİRİM düğmesine basın ve bırakın. AÇIK/KAPALI button. The display will show the required calibration weight (e.g., '120.0g').
3. Basın BİRİM button again. The display will read 'CAL' and then '0.0'.
4. Gently place the specified calibration weight (e.g., 100g or 120g, depending on the scale's prompt) onto the center of the weighing platform and wait for approximately 3 seconds.
5. Basın BİRİM button. The display should show 'PASS' and then return to '0.0'. Calibration is now complete. Remove the weight.

Bakım

• Temizlik: Tartıyı yumuşak, damp Bezle temizleyin. Aşındırıcı temizleyiciler kullanmayın veya teraziyi suya batırmayın.
• Depolamak: Store the scale in a dry, cool place. Avoid storing it in areas with high humidity or extreme temperatures.
• Pil Bakım: Uzun süre kullanılmayacaksa sızıntıyı önlemek için pilleri çıkarın.

Sorun giderme

• Kararsız Okumalar: If readings are unstable, ensure the scale is on a flat, stable surface, away from drafts, vibrations, and electronic devices that may cause interference. Recalibration may also be necessary.
• Görüntüleme Hataları: If the display shows 'EEEE' or 'O-Ld', the scale is overloaded. Remove the weight immediately. If 'Lo' appears, batteries are low and need replacement.

Özellikler

• Marka: Benim ağırlığım
• Modeli: Triton T2
• Kapasite: 120 Gram
• Kesinlik: 0.1 Gram
• Tartım Birimleri: Grams (g), Ounces (oz), Troy Ounces (ozt), Pennyweight (dwt)
• Görüntülemek: Arka aydınlatmalı LCD
• Güç: 2 x AAA Pil (dahil)
• Malzeme: Akrilonitril Bütadien Stiren (ABS)
• Özellikler: Tare function, Auto Calibration, Overload Protection, Expansion Tray (cover)
• Ürün Ağırlığı: Yaklaşık 6.4 ons

Ürün Bittiview

Garanti ve Destek

The My Weigh Triton T2 Digital Pocket Scale comes with a Lifetime Replacement Warranty (CE certified). For warranty claims or technical support, please contact My Weigh customer service through their official webLütfen siteden veya yetkili distribütörlerden satın alın. Satın alma belgesi olarak satın alma fişinizi saklayın.