Testboy Testavit Schuki 2K Socket Tester with RCD Test

1. Giriş ve Üzeriview

The Testavit Schuki 2K is a compact and reliable socket tester designed for quick and safe verification of 230V electrical outlets. It integrates an RCD (Residual Current Device) test function with adjustable nominal residual current settings, making it an essential tool for electricians and DIY enthusiasts. This manual provides detailed instructions for the proper use and maintenance of your device.

Image 1.1: The Testboy Testavit Schuki 2K socket tester, showing its compact design and integrated plug.

2. Güvenlik Bilgileri

Always prioritize safety when working with electrical systems. This device is designed for testing live circuits; therefore, extreme caution must be exercised. Failure to follow safety guidelines can result in electric shock, injury, or damage to property.

• Kullanmadan önce bu kullanım kılavuzunu iyice okuyun.
• Ensure the device is in good condition. Do not use if it appears damaged.
• This device is compliant with IEC 61010-1 standards.
• Elektrik testleri yaparken daima uygun kişisel koruyucu ekipman (KKD) kullanın.
• Do not attempt to open or repair the device. Refer to qualified personnel for service.
• Ses seviyesini doğrulayıntage of the circuit before testing to ensure it matches the device's specifications (230V AC).

3. Ürün Özellikleri

The Testavit Schuki 2K offers several key features for comprehensive socket testing:

• Gelişmiş Sistem: Equipped with a cable and earthed plug, allowing easy checking of sockets in 230V systems, including those in hard-to-reach locations.
• RCD Test Function: Perform RCD tests with an adjustable nominal residual current. Selectable settings include 10 mA, 30 mA, 100 mA, 300 mA, or 500 mA.
• Kalite ve Güvenlik: All Testboy devices undergo stringent quality and safety tests in the company's production facility.
• Kompakt Tasarım: Its small and ergonomic size ensures comfortable handling and easy storage in any toolbox.
• Pilsiz Çalışma: The device is powered directly by the circuit being tested, eliminating the need for batteries.

4. Bileşenler ve Kontroller

Familiarize yourself with the different parts and controls of the Testavit Schuki 2K:

• LED Göstergeleri: Multiple LEDs display the status of Phase (L1/PH), Earth (PE/SL), and Neutral (N/MP) connections.
• RCD Current Selector Dial (S1): Used to select the desired nominal residual current for the RCD test (10mA, 30mA, 100mA, 300mA, 500mA, OFF).
• RCD Test Button (T): RCD testini başlatır.
• Test Button (TEST): Used for specific wiring tests.
• Earthed Plug: Connects the device to the socket under test.

Resim 4.1: Yakın çekim view of the LED indicators, RCD current selector dial, and test buttons on the Testavit Schuki 2K.

5. Kurulum

Setting up the Testavit Schuki 2K is straightforward:

1. Ensure the socket to be tested is live and operating at 230V AC.
2. Visually inspect the Testavit Schuki 2K for any signs of damage.
3. Plug the device's earthed plug firmly into the socket you wish to test.
4. The device will immediately begin to indicate the wiring status via its LED display.

Image 5.1: The Testavit Schuki 2K plugged into a standard wall socket, ready for testing.

6. Kullanım Talimatları

6.1. Socket Wiring Test

Once plugged into a 230V socket, the device's LEDs will illuminate to indicate the wiring status. Refer to the legend on the device for specific interpretations. Common indications include:

• Doğru Kablolama: All LEDs illuminate in a specific pattern (refer to device markings).
• Missing Earth: A specific LED pattern indicates the absence of an earth connection.
• Reversed Phase/Neutral: Another pattern indicates incorrect phase and neutral connections.
• Missing Phase or Neutral: Specific LEDs will not illuminate.

Always consult the detailed legend on the device itself for precise interpretation of the LED patterns for various fault conditions.

6.2. RCD (Residual Current Device) Test

The RCD test function verifies the proper operation of the residual current device protecting the circuit.

1. Plug the Testavit Schuki 2K into the socket.
2. Rotate the RCD Current Selector Dial (S1) to the desired nominal residual current setting (e.g., 30 mA).
3. Press and hold the red RCD Test Button (T).
4. Observe the RCD (circuit breaker) in your electrical panel. A functional RCD should trip (switch off) within a short period (typically less than 200ms).
5. If the RCD trips, it indicates that the RCD is functioning correctly at the selected current. Reset the RCD at your electrical panel.
6. If the RCD does not trip, it indicates a potential fault with the RCD or the wiring. Do not use the circuit and consult a qualified electrician.
7. After testing, return the RCD Current Selector Dial (S1) to the "OFF" position.

Resim 6.1: Ayrıntılı view of the RCD current selector dial and the red RCD test button.

7. Bakım

The Testavit Schuki 2K requires minimal maintenance to ensure its longevity and accurate operation.

• Temizlik: Cihazı yumuşak, kuru bir bezle silin. Aşındırıcı temizleyiciler veya çözücüler kullanmayın. Cihazın içine nem girmemesine dikkat edin.
• Depolamak: Store the device in a dry, cool place, away from direct sunlight and extreme temperatures. Keep it in its original packaging or a protective case when not in use.
• Denetleme: Periodically inspect the cable and plug for any signs of wear, cuts, or damage. If any damage is found, discontinue use immediately.
• There are no user-serviceable parts inside the Testavit Schuki 2K. Any repairs should only be performed by authorized service personnel.

8. Sorun Giderme

If you encounter issues with your Testavit Schuki 2K, consider the following:

9. Özellikler

10. Garanti ve Destek

Testboy products are manufactured to high-quality standards. This product comes with a stated EU spare parts availability of 1 year. For warranty claims, technical support, or service inquiries, please contact Testboy customer service through their official channels. Keep your purchase receipt as proof of purchase.