Komut 17068

Kullanım Kılavuzu

Command 3M 17068 Wire Hooks With Strips

Model: 17068 | Brand: Command

Ürün Bittiview

The Command 3M 17068 Wire Hooks with Strips offer a damage-free solution for hanging items in your home or office. Designed to hold strongly on various surfaces, these hooks can be removed cleanly without leaving holes, marks, or sticky residue. Each pack contains two medium wire hooks and four medium adhesive strips, capable of holding up to 3 pounds (1.36 kg) per hook.

Command 3M 17068 Wire Hooks packaging showing two white hooks and adhesive strips.

Resim 1: Ön view of the Command 3M 17068 Wire Hooks packaging. It displays two white wire hooks and the included adhesive strips, highlighting key features like strong hold and clean removal. The 3M logo is visible at the top right.

Kurulum ve Yükleme

Proper installation ensures maximum holding power and clean removal. Follow these steps carefully:

  1. Yüzeyi Temizleyin: Select a smooth, clean surface. Wipe the area with rubbing alcohol (isopropyl alcohol). Do not use household cleaners as they may leave a residue. Allow the surface to dry completely.
  2. Şeridi hazırlayın: Separate the Command Adhesive Strips. Remove the red liner from one side of the strip.
  3. Apply to Hook: Press the adhesive strip firmly onto the back of the hook. Ensure the tab of the strip extends slightly below the hook for easy removal later.
  4. Duvara uygulayın: Remove the black liner from the other side of the strip. Position the hook on the desired surface. Press the hook firmly against the wall for 30 seconds.
  5. Beklemek: For maximum adhesion, wait 1 hour before hanging anything on the hook. This allows the adhesive to build strength.
Command 3M 17068 Wire Hooks packaging showing installation instructions.

Resim 2: Packaging of Command Wire Hooks, illustrating the "Damage-Free Hanging" feature. The image shows the two hooks and highlights the 1 kg (3 lb) weight capacity. The reverse side of the packaging often contains visual installation instructions.

İşletme ve Kullanım

Once installed, your Command Wire Hooks are ready for use. They are designed for indoor use and can hold items up to 3 pounds (1.36 kg). Ensure the weight of the item you intend to hang does not exceed this limit.

  • Değerli veya yeri doldurulamayacak eşyaları asmayın.
  • Yatakların üzerine asılmayın.
  • Do not use on wallpaper, vinyl surfaces, or other delicate surfaces.
  • Ensure the hook is securely attached before hanging any item.

Bakım ve Kaldırma

Command Hooks require minimal maintenance. If you need to move or remove a hook, follow these steps for clean removal:

  1. Öğeyi Kaldır: Take off any item hanging on the hook.
  2. Hold Hook: Gently hold the top of the hook. Do not press the hook against the wall.
  3. Stretch Strip: Slowly stretch the adhesive strip straight down along the wall, keeping your hand against the wall. Stretch the strip at least 6 inches (15 cm) until the hook releases from the wall. Do not pull the strip outwards or upwards.
  4. Yeniden başvuru: If you wish to re-use the hook, you will need a new Command Medium Adhesive Strip.

To clean the hooks, simply wipe them with a damp bezle silin. Aşındırıcı temizleyiciler kullanmayın.

Sorun giderme

  • Hook fell off:
    • Uygulamadan önce yüzeyin alkolle temizlendiğinden ve tamamen kuruduğundan emin olun.
    • Verify that the strip was pressed firmly against the hook and the wall for 30 seconds each.
    • Confirm that the 1-hour waiting period was observed before hanging items.
    • Check if the weight of the item exceeded the 3-pound limit.
  • Residue left on wall after removal:
    • The strip might not have been stretched straight down or stretched enough (at least 6 inches).
    • Ensure the strip was not pulled outwards or upwards during removal.
  • Hook not sticking to surface:
    • The surface might be textured, porous, or painted with a low-VOC paint, which can affect adhesion. Command hooks work best on smooth, solid surfaces.
    • Ensure the surface is not wallpaper or vinyl, as these are not recommended.

Özellikler

MarkaEmretmek
Model Numarası17068
RenkBeyaz
MalzemePlastik
Montaj TipiDuvara Montaj
Ağırlık sınırı3 Pound (1.36 kg)
Önerilen KullanımKapalı
Ürün Boyutları (U x G x Y)6.7 x 3.6 x 2 inç (17.02 x 9.14 x 5.08 cm)
Ürün Ağırlığı1.6 ons (45.36 gram)
Kanca SayısıPaket başına 2
UPC051131921276
İlk Mevcut Tarih18 Eylül 2009

Garanti ve Destek

Specific warranty information for the Command 3M 17068 Wire Hooks is typically provided on the product packaging or through the manufacturer's official website. For detailed warranty terms, product support, or to purchase replacement strips, please visit the official Command brand webWeb sitesini ziyaret edin veya 3M müşteri hizmetleriyle iletişime geçin.

You can often find more information and support resources by visiting the Amazon'daki Command Store.

İlgili Belgeler - 17068

Önview Command 17006CLR-ES Şeffaf Mini Kancalar: Uygulama ve Çıkarma Kılavuzu
Command Clear Mini Kancaların (model 17006CLR-ES) şeffaf yapışkan bantlar kullanılarak takılması ve çıkarılması için adım adım talimatlar. Kullanım ipuçları ve garanti bilgileri içerir.
Önview Command Hooks: Easy On and Off Installation Guide
Step-by-step instructions for applying and removing Command Hooks, ensuring a secure hold and damage-free removal. Includes guides for both installation and removal.
Önview Command Hook Kurulum ve Kaldırma Talimatları
17003ES modeline ait ürün bilgileri ve garanti detayları dahil olmak üzere Command kancalarının uygulanması ve çıkarılmasına ilişkin adım adım kılavuz.
Önview Dynojet Power Commander 6 Installation Guide for Kawasaki Z125 (PC6-17068)
Detailed installation guide for the Dynojet Power Commander 6 (PC6-17068) on 2017-2020 Kawasaki Z125 motorcycles. Covers parts list, optional accessory inputs, wiring connections, and step-by-step installation procedures.