1. Giriş
This manual provides detailed instructions for the installation, operation, and maintenance of your Perel E305DIN1 DIN Rail Week Timer. Please read this manual thoroughly before using the device to ensure proper function and safety. The Perel E305DIN1 is designed for precise daily and weekly control of electrical circuits.
2. Özellikler
The Perel E305DIN1 DIN Rail Week Timer offers a range of functionalities for efficient time management of electrical devices:
- Günlük ve Haftalık Programlar: Allows for flexible scheduling across days and weeks.
- 8 ON/OFF Program Locations: Configure up to 8 distinct ON and OFF switching times.
- LCD Ekran: Clear display of time, day of the week, and current operating status.
- NiMH Backup Battery: Integrated battery provides up to 200 hours of autonomy after a full charge, preserving settings during power outagee.
- 3-Way Manual Override: Easily switch between ON, OFF, and AUTO modes manually.
- Montaj Seçenekleri: Designed for DIN rail mounting or wall mounting using the included bracket.
- Şeffaf Koruyucu Kapak: Provides protection for the display and controls.
3. Kurulum ve Kurulum
Uyarı: Installation should only be performed by a qualified electrician. Ensure the main power supply is disconnected before commencing installation.
3.1 Montaj
The E305DIN1 timer can be mounted in two ways:
- DIN Ray Montajı: Snap the timer onto a standard 35mm DIN rail within an electrical enclosure.
- Duvara Montaj: Use the provided bracket to secure the timer to a wall. Ensure the mounting surface is stable and capable of supporting the device.
3.2 Elektrik Bağlantısı
Refer to the wiring diagram provided with the device for specific connection points. General steps include:
- Connect the main power supply (220-250VAC, 50Hz) to the designated input terminals.
- Connect the load (device to be controlled) to the output terminals. Ensure the load's specifications do not exceed the timer's maximum output capacity (16A resistive, 8A inductive).
- Double-check all connections for tightness and correctness before restoring power.

Image: Perel E305DIN1 DIN Rail Week Timer. This image shows the front view of the timer, highlighting its LCD display, control buttons, and transparent protective cover.
4. Kullanım Talimatları
After installation and power-up, the timer's internal battery will charge. Allow sufficient time for the battery to charge for optimal backup functionality.
4.1 Geçerli Saati ve Günü Ayarlamak
- Basın SAAT düğme.
- Tutarken SAAT, tuşuna basın GÜN Haftanın geçerli gününü ayarlamak için düğmeyi kullanın.
- Tutarken SAAT, tuşuna basın SAAT Güncel saati ayarlamak için düğmeye basın.
- Tutarken SAAT, tuşuna basın DAKİKA Güncel dakikayı ayarlamak için düğmeye basın.
4.2 Programlama Açma/Kapama Zamanları
The timer allows for up to 8 ON/OFF program pairs.
- Basın PROG button once to enter program mode. The display will show '1 ON'.
- Kullanın GÜN, SAAT, Ve DAKİKA buttons to set the desired ON time for program 1.
- Basmak PROG Tekrar. Ekranda '1 OFF' yazısı görünecektir.
- Kullanın GÜN, SAAT, Ve DAKİKA buttons to set the desired OFF time for program 1.
- Repeat steps 1-4 for programs 2 through 8.
- Basın SAAT button to exit program mode and return to normal operation.
4.3 Manuel Geçersiz Kılma Fonksiyonu
The manual override function allows you to temporarily change the timer's output state without affecting programmed settings.
- Basın KILAVUZ modlar arasında geçiş yapmak için düğme:
- AÇIK: The output is continuously ON, overriding any programmed OFF times.
- KAPALI: The output is continuously OFF, overriding any programmed ON times.
- OTO: The timer operates according to the programmed ON/OFF schedules.
5. Bakım
The Perel E305DIN1 timer requires minimal maintenance.
- Temizlik: Dış yüzeyi yumuşak ve kuru bir bezle silin. Aşındırıcı temizleyiciler veya çözücüler kullanmayın.
- Pil Yedekleme: The internal NiMH battery is designed for long life. If the timer frequently loses its settings during power outagAksi takdirde, pilin kalifiye bir teknisyen tarafından değiştirilmesi gerekebilir.
- Çevresel Koşullar: Ensure the timer operates within its specified temperature range (-10°C to 40°C) and avoid excessive humidity or direct sunlight.
6. Sorun Giderme
If you encounter issues with your Perel E305DIN1 timer, refer to the following common problems and solutions:
- Zamanlayıcı programlandığı gibi AÇILIP KAPANMIYOR:
- Zamanlayıcının açık olup olmadığını kontrol edin. OTOMATİK mode. If it's in ON or OFF manual override, it will ignore programs.
- Verify that the programmed ON/OFF times are correctly set and correspond to the current day.
- Ensure the current time and day are accurately set on the timer.
- Ekran boş veya titriyor:
- Check the main power supply to the timer.
- If power is present, the internal backup battery might be completely discharged. Allow the timer to be powered for several hours to recharge the battery.
- Elektrik kesintisi sonrasında zamanlayıcı ayarları kayboluyor.tage:
- The internal NiMH backup battery may not be fully charged or may be at the end of its lifespan. Ensure the timer is continuously powered for at least 24 hours to fully charge the battery. If the issue persists, the battery may need replacement.
- Time drift (timer becomes inaccurate over time):
- The timer has a specified accuracy of ±1 minute per month. Minor adjustments may be necessary periodically. If the drift is significantly higher, contact support.
Bu adımlar sorunu çözmezse lütfen müşteri desteğiyle iletişime geçin.
7. Özellikler
Below are the technical specifications for the Perel E305DIN1 DIN Rail Week Timer:
| Güç Kaynağı | 220 ~ 250VAC / 50Hz |
| Output (Resistive Load) | 16A @ 230VAC, max. 3680W |
| Output (Inductive Load) | 8A @ 230VAC (cos µ = 0.4) |
| Minimum Anahtarlama Aralığı | 1 dakika |
| Güç Tüketimi | 4.4W |
| Çalışma Sıcaklığı | -10°C ila 40°C |
| Zaman Doğruluğu | ± ayda 1 dakika |
| Yedek Pil | NiMH, up to 200h autonomy |
| Montaj | DIN Rail or Wall Mount |
| Malzeme | Plastik |
| Renk | Şeffaf |
8. Garanti ve Destek
This Perel product is covered by a standard manufacturer's warranty. Please refer to the warranty card included with your purchase for specific terms and conditions. For technical support, troubleshooting assistance, or warranty claims, please contact your retailer or the Perel customer service department.
Garanti kapsamında satın alma belgenizi satın alma belgeniz olarak saklayın.